Garden Groom Garden Groom "Midi" GG10 Manual de instruções - Página 5

Procurar online ou descarregar pdf Manual de instruções para Aparador Garden Groom Garden Groom "Midi" GG10. Garden Groom Garden Groom "Midi" GG10 8 páginas. Safety hedge trimmer, "midi"
Também para Garden Groom Garden Groom "Midi" GG10: Manual (10 páginas)

Imprimir página

General Power Tool Safety Warnings

WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire

and/or serious injury. Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas invite

accidents.

b) Do not operate power tools in explosive atmospheres, such as

in the presence of flammable liquids, gases or dust. Power tools create

sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never modify the plug

in any way. Do not use any adapter plugs with earthed (grounded)

power tools. Unmodified plugs and matching outlets will reduce risk

of electric shock.

b) Avoid body contact with earthed or grounded surfaces, such as

pipes, radiators, ranges and refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions. Water

entering a power tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or

unplugging the power tool. Keep cord away from heat, oil, sharp

edges or moving parts. Damaged or entangled cords increase the

risk of electric shock.

e) When operating a power tool outdoors, use an extension cord

suitable for outdoor use. Use of a cord suitable for outdoor use

reduces the risk of electric shock.

f) If operating a power tool in a damp location is unavoidable, use

a residual current device (RCD) protected supply. Use of an RCD

reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use common sense

when operating a power tool. Do not use a power tool while you

are tired or under the influence of drugs, alcohol or medication.

A moment of inattention while operating power tools may result

in serious personal injury.

b) Use personal protective equipment. Always wear eye protection.

Protective equipment such as dust mask, non-skid safety shoes,

hard hat, or hearing protection used for appropriate conditions

will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in the off-

position before connecting to power source and/or battery pack,

picking up or carrying the tool. Carrying power tools with your

finger on the switch or energising power tools that have the switch

on invites accidents.

d) Remove any adjusting key or wrench before turning the power

tool on. A wrench or a key left attached to a rotating part of the

power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at all times.

This enables better control of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or jewellery. Keep your

hair, clothing and gloves away from moving parts. Loose clothes,

jewellery or long hair can be caught in moving parts.

g) If devices are provided for the connection of dust extraction

and collection facilities, ensure these are connected and properly

used. Use of dust collection can reduce dust-related hazards.

h) We recommend wearing gloves

Operating Instructions

4) Power tool use and care

a) Do not force the power tool. Use the correct power tool for

your application. The correct power tool will do the job better

and safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on

and off. Any power tool that cannot be controlled with the switch

is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or the battery

pack from the power tool before making any adjustments,

changing accessories, or storing power tools. Such preventive

safety measures reduce the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children and do not

allow persons unfamiliar with the power tool or these

instructions to operate the power tool. Power tools are dangerous

in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of

moving parts, breakage of parts and any other condition that

may affect the power tool's operation. If damaged, have the

power tool repaired before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting

tools with sharp cutting edges are less likely to bind and are

easier to control.

g) Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into account the

working conditions and the work to be performed. Use of the

power tool for operations different from those intended could

result in a hazardous situation.

5) Service

Have your power tool serviced by a qualified repair person

using only identical replacement parts. This will ensure that the

safety of the power tool is maintained

If the replacement of the supply cord is necessary, this has to be

done by the manufacturer or his agent in order to avoid a safety

hazard.

Hedge trimmer safety warnings:

•Keep all parts of the body away from the cutter blade. Do not

remove cut material or hold material to be cut when blades are

moving. Make sure the machine is disconnected before clearing

jammed material. A moment of inattention while operating the

hedge trimmer may result in serious personal injury.

•Carry the hedge trimmer by the handle with the cutter blade

stopped. Proper handling of the hedge trimmer will reduce

possible personal injury from the cutter blades.

•Keep cable away from cutting area. During operation the cable

may be hidden in shrubs and can be accidentally cut by the

blade.

-Stop the tool when crossing surfaces other than hedges and

when transporting the tool to and from the area to be cut.

•Never operate the Garden Groom Midi without the container or

fully assembles volume bag attachment

•The operator is responsible for accidents and hazards occurring

to other people or their property

•Never tape the switches

•Never use the Garden Groom at eye level

•Always use ladders or a platform when working over head

height

•Do not start the machine in situ i.e. buried in hedge

Inlet

Retaining

clip

Operating Instructions

Interlock

Switch Peg

Hook &

Volume

Loop

Zip

bag

Flexible

Zip

hose

Interlock Peg

Extension Tube

Interlock

Switch

Exhaust

Extension Tube

Interlock

Peg

Inlet

Extension

Tube

Outlet