HIKVISION DS7208HVI-SN Manual do produto/manutenção - Página 15

Procurar online ou descarregar pdf Manual do produto/manutenção para DVR HIKVISION DS7208HVI-SN. HIKVISION DS7208HVI-SN 18 páginas.

②. No VOUT Output

Step 1: measurement HK-5 (TVS9) whether short circuit, or replacement

Step 2: measuring 75Ωresistance (RS117) impedence, or replacement

Step 3: monitor's signal lines connected to the probe, directly from SGM9111

(US7) chip PIN 4 draw out the VOUT signal, or replacement

Step 4: measuring 75Ω resistance (RS188), or replacement, and then monitor's

signal lines connected to the probe, directly lead CVBS -VOUT signal

from 75Ω resistance (RS188) end, or KY2010 ruled out

③. Image Problem

Phenomenon 1: there is no video signal, first exclude HK-5 (TVS1-8) whether

short circuit, or replacement; Measuring 75Ω(RV1-8) resistance, or

replacement, and then ruled out 100Ωresistance (RU1-8); Finally ruled out

TW2866 (can directly introduce video signal into TW2866 chip video input

end,PIN13/17/21/25, to rule out the chip is normal or not)

Phenomenon 2: a few channel image black screen, first rule out the software

settings, otherwise introduce video signal into TW2866 chip video input end,PIN

13/ 17/21/25, to rule out the chip is normal, or replacement

Phenomenon 3: all black and white images or flower screen, to rule out 27 M

(Y4/Y5), then rule out software, or change TW2866

④. Voice Problems

Phenomenon 1: preview no voice, first without software Settings, then

measuring 100 resistance (RS46) and capacitance (CS18) impedance, or

replacement, finally ruled out TW2866 (US1) (can directly introduce audio

signal into TW2866 chip audio input PIN 6, to rule out the chip is normal or not)

Phenomenon 2: voice talkback AOUT no output, measuring 3.9 K resistance

(RS60) + 390Ωresistance (RP24) resistance, or replacement, finally ruled out

TW2866 (US1) (directly lead AOUT signal from the TW2866 chip PIN2, to

exclude the chip is normal or not)