HIKVISION HiLook Series Manual do utilizador - Página 9

Procurar online ou descarregar pdf Manual do utilizador para DVR HIKVISION HiLook Series. HIKVISION HiLook Series 14 páginas. Smart hybrid light bullet & turret camera
Também para HIKVISION HiLook Series: Manual de início rápido (18 páginas), Manual do utilizador (18 páginas), Manual do utilizador (20 páginas), Manual do utilizador (18 páginas), Manual do utilizador (13 páginas), Manual do utilizador (17 páginas)

4. Align the screw holes in the bracket to the ceiling,

and secure the camera with three PA4 × 25 screws

(supplied).

Figure 2-9 Secure the Camera to the Ceiling

5. Connect the cables.

6. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure

below.

1). Loosen the trim ring to adjust the pan position

[0° to 360°].

2). Loosen screw A to adjust the tilt position [0° to

180°].

3). Loosen screw B to adjust the rotation position [0°

to 360°].

7. Tighten the trim ring and screws to finish the

installation.

2.2.2 Ceiling/Wall Mounting with Junction Box

Installation of type II camera with junction box is similar

with that of type I camera. Refer to 2.1.2 Ceiling/Wall

Mounting with Junction Box for details.

3 Menu Description

Please follow the steps below to call the menu.

Note:

The actual display may vary with your camera model.

Steps:

1. Connect the camera with the TVI DVR and the

monitor, as shown in figure 3-1.

Camera

2. Power on the camera, TVI DVR, and monitor to view

the image on the monitor.

3. Click PTZ Control to enter the PTZ Control interface.

4. Call the camera menu by clicking

calling preset No. 95.

Figure 2-10 3-Axis Adjustment

Figure 3-1 Connection

TVI DVR

button or

Monitor