HIKVISION HiLook Series Manual do utilizador - Página 12

Procurar online ou descarregar pdf Manual do utilizador para DVR HIKVISION HiLook Series. HIKVISION HiLook Series 18 páginas. Smart hybrid light bullet & turret camera
Também para HIKVISION HiLook Series: Manual de início rápido (18 páginas), Manual do utilizador (18 páginas), Manual do utilizador (14 páginas), Manual do utilizador (20 páginas), Manual do utilizador (13 páginas), Manual do utilizador (17 páginas)

6. Route the cables through the bottom cable hole or

the side cable hole of the junction box.

7. Combine the junction box cover with the base of the

camera and secure it with two M4 × 10 screws.

Junction Box Cover

Camera Base

Figure 2-21

8. Fix the junction box cover onto the junction box

body with three M3 screws.

Figure 2-22

9. Connect the power cord and video cable and put

the cables back into the junction box.

10. Repeat the steps 6 to 9 of 2.3.1 Ceiling Mounting

Without Junction Box to finish the installation.

2.3.3 Wall Mounting

Before you start:

You need to purchase a wall mount in advance.

Steps:

1. Drill Ø10 mm screw holes in the wall where you

want to install the wall mount.

2. Use four M6 expansion bolts to fix the wall mount

onto the wall.

3. Loosen the set screw.

4. Refer to step 1 of 2.3.1 Ceiling Mounting Without

Junction Box to dissemble the camera.

5. Use two M4 screws to fix the base onto the wall

mount.

Combine Junction Box Cover and Camera

Combine Junction Box Cover and Junction

Box Body

Figure 2-23

Figure 2-24

Base

Finish Installation

Fix Wall Mount