HIKVISION HiWatch Series Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para DVR HIKVISION HiWatch Series. HIKVISION HiWatch Series 15 páginas. Hd turret and bullet camera
Também para HIKVISION HiWatch Series: Manual de início rápido (15 páginas), Manual de início rápido (20 páginas), Manual de início rápido (18 páginas), Como fazer (4 páginas), Manual do utilizador (15 páginas)

Figure 2-12 Fix the Camera to the Ceiling

Note:

The supplied screw package contains



self-tapping screws, and expansion bolts.

For cement ceiling, expansion bolts are



required to fix the camera. For wooden ceiling,

self-tapping screws are required.

4. Route the cables through the cable hole, or the side

opening.

5. Connect the corresponding power cord, and video

cable.

6. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle.

Rotation Position

[0°to 360°]

1). Loosen the No.3 screw to adjust the pan

position [0° to 360°]. Tighten the screw after

completing the adjustment.

2). Loosen the No.2 screw to adjust the tilt position

[0° to 180°]. Tighten the screw after completing

the adjustment.

3). Loosen the No.1 screw and rotate the camera [0°

to 360°]. Tighten the screw after completing the

adjustment.

3 Menu Description

Purpose:

Call the menu by clicking button

interface, or call the preset No.95.

Steps:

1. Connect the camera with the TVI DVR, and the

monitor, shown as the figure 3-1.

Camera

Figure 2-13 3-axis Adjustment

Figure 3-1 Connection

Pan Position

[0° to 360°]

on the PTZ Control

TVI DVR

Tilt Position

[0°to 180°]

Monitor