HIKVISION HiWatch Series Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para DVR HIKVISION HiWatch Series. HIKVISION HiWatch Series 15 páginas. Hd turret and bullet camera
Também para HIKVISION HiWatch Series: Manual de início rápido (15 páginas), Manual de início rápido (20 páginas), Manual de início rápido (18 páginas), Como fazer (4 páginas), Manual do utilizador (15 páginas)

Figure 2-3 Attach the Camera to the Ceiling

Note:

The supplied screw package contains



self-tapping screws, and expansion bolts.

For cement ceiling, expansion bolts are required



to fix the camera. For wooden ceiling,

self-tapping screws are required.

4. Route the cables through the cable hole, or the side

opening.

5. Put the trim ring back, and tighten it by rotating it

clockwise.

Figure 2-4 Put the Trim Ring Back and Tighten It

6. Connect the corresponding cables, such as power

cord, and video cable.

7. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle.

Tilt Position

[0° to 75°]

2.2 Installation of Type II Camera

Before you start:

Both wall mounting and ceiling mounting are suitable

for the camera. We take ceiling mounting as an example

in this section. You can take the steps of ceiling

mounting as a reference, when adopting wall mounting.

Steps:

1. Disassemble the turret camera.

1). Use the screw driver to loosen the screw on the

mounting base.

2). Take out of the camera body.

Rotate

Clockwise

Pan Position

[0° to 360°]

Figure 2-5 3-axis Adjustment

Rotation Position

[0° to 360°]