Avantree BTHS-AS9P Manual do utilizador - Página 8

Procurar online ou descarregar pdf Manual do utilizador para Auscultadores Avantree BTHS-AS9P. Avantree BTHS-AS9P 10 páginas. Low latency wireless headphones
Também para Avantree BTHS-AS9P: Manual do utilizador (6 páginas)

Imprimir página

Charging

When the LED blinks red, you should recharge your headphones. Remove the Micro USB port protector

and charge the headphones via the supplied Micro USB cable. It normally takes about 3 hours to fully

charge the battery. The LED will stay red when charging and will turn o when charging is complete.

Charging requirement: You can plug our supplied Micro USB cable into a compatible USB charger (wall

charger/travel charger/car charger etc.) with 5V/500mA-2A output or to a PC/Mac USB port. It is OK to

use most mobile phone chargers on the market.

Clear pairing history

You may need to reset your Audition Pro if it's not working as expected. In standby mode, press and

hold both "V+" and MFB buttons for 5 seconds until the LED ashes blue and red together very quickly

about 2 times and then the headset will turn o automatically. Now your Audition Pro has been

restored to its default settings. After turning it on again, it will automatically enter pairing mode.

Troubleshooting

No sound with PC?

1. Under Playback Devices select the Avantree AS9P as the default playback device

2. When using AS9P to make VOIP calls from an app, please select the AS9P Hands-Free for Micro

phone and Speaker device

No sound using a Bluetooth transmitter to watch TV?

1. Ensure the Bluetooth transmitter and headphones are connected properly

2. Check that your audio OUTPUT is functioning properly

· AUX & RCA (red and white) outputs on TV – test audio with any wired headphone

· OPTICAL output on TV – set your TV audio format to "PCM/LPCM" or turn o Dolby/DTS

3. Change your TV audio out device setting to External speakers/Headset

Micro USB cable