Avantree BTHT-4189-BLK Manual do utilizador - Página 10
Procurar online ou descarregar pdf Manual do utilizador para Auscultadores sem fios Avantree BTHT-4189-BLK. Avantree BTHT-4189-BLK 10 páginas. Wireless headphone transmitter set
Imprimir página
- 1. Table of Contents
- 2. Overview
- 3. LED Indication & Voice Prompts
- 4. Turn on HT4189
- 5. Tvs with RCA Audio out(Red/White Ports Labeled "AUDIO OUT")
- 5. Use HT4189 with Your TV
- 5. Check Your Tvs Output Options before the Set up
- 5. Tvs with OPTICAL Audio out
- 5. TV S with AUX 3.5Mm Audio out
- 6. Use HT4189 with Your AV Receiver with 6.35Mm PHONE Jack
- 7. Use HT4189 with Your Pc/Laptop
- 8. Use the Headphone Independently with Cellphone
- 9. Add a 2Nd Pair of Headphones
- 10. Clear Paired History
- 11. Headphone Charging
- 12. Troubleshooting
Add a 2nd pair of headphones
• Powering up the transmitter, then turn on the HT4189 headphones and transmitter - they will
connect automatically. Now, turn o the headphone.
• Enter the transmitter into PAIRING MODE manually - press and hold B for 2 seconds,
ashes
BLUE
and
RED
• Place your 2nd headphones into Bluetooth PAIRING MODE (please refer to your 2nd headphones'
user manual).
• Keep the devices close to each other and wait. Once connected,
turn SOLID BLUE.
• Now turn back on the rst headphone, it should auto reconnect to the transmitter.
Reconnect - Next time, the 2nd headphones will also auto reconnect to the transmitter once turn on.
Otherwise, click B once on the transmitter to initiate the reconnecting and
once per 2 seconds.
Clear paired history
Clear the paired history of the transmitter
After power on, press and hold BOTH A and B together for 7 seconds, both
seconds, then A enter pairing mode automatically,
Clear the paired history of the headphones
After turning on, press and hold both "+" and "-" for 10 seconds until the
on for 2 seconds (looks
pairing mode automatically with the LED ashing alternately
Headphone charging
Please charge the headphones if you hear the "low battery" voice prompt. You can charge using a
phone charger (5V/500mA-2A output), PC USB port, TV USB port or any other USB outlet using the
included USB cable. It takes about 3.5 hours to fully charge the headphones. The LED will turn
during charging and turn o once charging is complete.
Troubleshooting
https://support.avantree.com/hc/en-us/sections/360000098383-BTHT-4189-BLK
alternately.
PINK)
- now all the paired history of the headphones is cleared. It then enters
close to B on the transmitter will
close to A ashes
RED
and
RED
RED
and BLUE.
close to B
close to B ashes
BLUE
will be on
BLUE
for 2
BLUE
alternately.
and
BLUE
LEDs are BOTH
RED
9