Lexmark 34B0185 - High Voltage Laser Printer Manual de manutenção - Página 4
Procurar online ou descarregar pdf Manual de manutenção para Impressora Lexmark 34B0185 - High Voltage Laser Printer. Lexmark 34B0185 - High Voltage Laser Printer 8 páginas. Maintenance manual
Também para Lexmark 34B0185 - High Voltage Laser Printer: Configuração (2 páginas), Referência rápida (5 páginas), Manual de resolução de problemas (10 páginas)
Imprimir página
5
Press
again to print the alignment page.
6
Press
until Set A appears, and then press
7
From the printed sheet, find the straightest of the 20 lines beside the letter A.
8
Press
or
until that number is displayed, and then press
Submitting Selection appears.
9
Repeat steps 6 through 8 to align sets A through L.
10
Press
.
11
Press
until Exit Config Menu appears, and then press
Resetting the Printer appears briefly, followed by a clock, and then Ready appears.
Cleaning the printhead lenses
Clean the printhead lenses if you encounter print quality problems.
Warning—Potential Damage: To avoid overexposing the photoconductors, do not leave the inner door open longer
than 10 minutes.
1
Open the upper and inner doors.
2
Remove all four toner cartridges, but do not remove the photoconductors for this procedure.
3
Locate the four printhead lenses.
1
Printhead lenses
4
Clean the lenses using a can of compressed air.
Warning—Potential Damage: Do not touch the printhead lenses or they may be damaged.
5
Reinstall the toner cartridges.
6
Close the doors.
.
.
.
Maintaining the printer
4