Avantree Saturn Manual do utilizador - Página 3
Procurar online ou descarregar pdf Manual do utilizador para Recetor Avantree Saturn. Avantree Saturn 6 páginas. Bluetooth audio transmitter & receiver 2-in-1
Também para Avantree Saturn: Manual do utilizador (5 páginas)
Imprimir página
LED indicator
Blue LED Blinks continuously
Blue LED flashes once every 1 seconds
Blue LED flashes twice every 4 seconds
Red Led blinks
We found most problems are caused by improper pairing. Please follow the online instruction step by step.
6. Receiver, Turn On / Off
Pls. push the click button to RX mode from TX / RX positon, before power on.
TX or RX mode can not be changed after powering on Saturn.
Turn On: press and hold Saturn's MFB button for around 5 - 7 seconds until the blue LED is on for 1 second.
Turn Off: press and hold the MFB button of Saturn for around 3 - 4 seconds until the red LED is on for 1 second, and then go off.
7. Receiver, pairing with a Bluetooth device (Tutorial online)
7.1 Pairing procedure:
A．Plug the 3.5 mm audio cable into Satun's 3.5 mm audio socket, and plug the
other end (or 2 x RCA which is red and white connector ) into the audio input of home hifi stereo system.
B. Ensure Saturn has pushed into RX mode, and device is off.
C. Put Saturn and your Bluetooth enabled phone within 1 meter.
D. Press and hold the MFB button of Saturn for around 6-8 seconds till Blue and Red LED light blinks quickly and alternatively, which is
in pairing mode.
E. Make your smart-phone enter into Bluetooth mode, here take iPhone as an example. From your iPhone home page, tap "Settings"
"General " " Bluetooth" " On"
( Notes: Pls. kindly be noted different phone or tablet have different procedure to active its Bluetooth function , pair, connect with
other Bluetooth device, here just a general situation)
F. iPhone will auto scan the available Bluetooth devices, and click "Avantree Saturn" from the list of devices shown; and according to
the indication, tap "Yes" or "Confirm" .
G. After pairing successful, complete Blue LED will blink twice every 4 seconds.
Note:
1. The pairing mode will last 2 minutes. The receiver will enter standby mode if no devices can be connected with 2 minutes.
2. Saturn's receiver can pair with stereo Bluetooth devices with PIN code "0000", "1111", "8888" or "1234".
3. If pairing is failed, pls., power off Saturn and repair according to above mentioned procedures.
4. The Saturn can remember 8 paired devices, when the number of paired devices exceeds 8, the first one will be replaced.
5. Every time Saturn power on, it will connect to the last connected device automatically. If you want tot pair it to other devices,
please turn off the current devices Bluetooth function first and try to pair the receiver to the new device according to above
mentioned pairing procedures.
Status of Saturn under TX mode
Pairing mode, last for 2 minutes
Standby mode and not connected with a device
Connect with a device
Low power