KitchenAid YKGRT607HB5 Manual de instruções de instalação - Página 5

Procurar online ou descarregar pdf Manual de instruções de instalação para Gamas KitchenAid YKGRT607HB5. KitchenAid YKGRT607HB5 14 páginas. 30" freestanding and slide-in sealed burner gas range with self-cleaning thermal/convection oven

Imprimir página
Now start...
With range in kitchen.
--_
ut on safety glasses and gloves.
Remove shipping materials, tape and
protective film from range. Keep
cardboard bottom and shipping base under range.
Remove oven racks and parts package from inside
oven. If you have a slide-in range, remove back
vent package from range top. See Step 7 for
installation.
cardboar_
corner
posts
F_
ake 4 cardboard corner posts from the
carton. Stack one cardboard corner post
on top of another. Repeat with the other
two corner posts. Place corner posts lengthwise on
the floor in back of range so corner posts will
support outer side edges of range as shown.
Excessive Weight Hazard
Use two or more people to move and install
range.
Failure to follow this instruction can result
in back or other injury.
F_
irmly grasp the range and gently lay it on
its back on the cardboard corner posts.
---_
ull cardboard bottom and shipping base
firmly to remove.
26"
cm)
countertop
over 24"
(61 cm)
cabinet
anti-tip
bracket
template
_]
lace the anti-tip bracket template on the
floor in the cabinet opening so that the
left edge is against cabinet and the top
edge is against the rear wall, molding or cabinet.
If countertop is deeper than 25 inches (63.5 cm),
measure and mark a distance 25 inches (63.5 cm)
in from front of countertop
opening
and align
template with mark (or subtract 25 inches (63.5
cm) from the countertop depth and add the
difference to the corresponding dimension).
26" (63.6 cm
Countertop
overhangs
X
cabinet side.
A = Difference between
countertop
depth and
26"
(63.6
cm).
_A
anti-tip bracket
template
If countertop is not flush to the side of the cabinet
opening, align the left side of the template to allow
for the countertop overhang. Tape the freestanding
range anti-tip bracket template in place.
Contact a qualified floor covering installer for
the best procedure of drilling mounting holes
through your type floor covering.
Before moving, slide range onto cardboard or
hardboard.
I1"
Press on front of storage drawer and
release to open. Pull open to first stop
•
position. Lift front of drawer to clear
white wheels in drawer guides. Remove drawer
and set it aside on a protected surface.
14 ]
Carefully move range into final position.
Look under range (a flashlight may be
•
needed) to check that left rear leveling
leg is engaged in the anti-tip bracket. If leveling leg
is not properly engaged, remove and reposition the
anti-tip bracket to insure that the leveling leg fits
properly in the anti-tip bracket.
-'_
se an adjustable wrench to loosen the
leveling legs 1-1/2 turns.
-J
lace cardboard or hardboard in front of
range. Stand range back up onto
cardboard or hardboard.
Rear vent MUST
be installed.
-Jlf you have a slide-in
range, remove the
outside screws from rear trim on range.
Use screws to attach rear vent to range.
-_
heck that the type of gas supply is
correct for this range. (See model/serial
rating plate.)
If connecting
to L.P. Gas, follow directions in
Conversion Kit included in your literature package.
If connecting to Natural gas, go to Step 9.
Tip Over Hazard
A child or adult can tip the range and be
killed.
Connect anti-tip bracket to rear range foot.
Reconnect the anti-tip bracket, if the range
is moved.
Failure to follow these instructions can
result in death or serious burns to children
and adults.
Panel D
[i 0 ]z°m°untan,,-t,pbrack.tt°
floor, use the anti-tip bracket template
•
to mark where to drill mounting holes.
Use a drill with a 1/8" (0.3 cm) drill bit to drill the
two mounting holes. Remove template from floor.
To mount anti-tip bracket to concrete or
ceramic floor, use the anti-tip bracket template to
mark where to drill mounting holes. Use a drill with
a 3/16" (0.5 cm) masonry drill bit to drill the two
holes. Remove template from floor. Tap plastic
anchors into mounting holes in floor with hammer.
Line up holes in anti-tip bracket with mounting
holes in floor. Use the screws provided to fasten
anti-tip bracket to floor.
NOTE: Anti-tip bracket must be mounted
securely to the sub-floor. Depending on the
thickness of your flooring, longer screws may be
necessary to anchor the bracket to the sub-floor.
Longer screws are available from your local
hardware store.
I1
"
Move range close to cabinet opening.
L
Remove cardboard or hardboard from
•
under range.
I1
Place rack in oven. Place level on rack,
first side to side; then front to back. If
the range is not level, pull range
forward until the rear leveling leg is removed from
the anti-tip bracket. Adjust the leveling legs up or
down. Then slide range back into position. Check
that leveling leg is engaged in anti-tip bracket.
NOTE: Oven must be level for satisfactory baking
conditions.
All connections
must be wrench-tightened.
_
pressure
regulator
and valve assembly
3" (7,6 cm)
flexible
_connector
connector
manual
shutoff valve
1/2" (1.3 cm) flare union adapters
I16
Assemble the flexible connector from
the gas supply pipe to the pressure
•
regulator, located in the lower left side
of the storage drawer area, in this order: shutoff
valve, 1/2" (1.3 cm) flare union adapter, flexible
connector, 1/2" (1.3 cm) flare union adapter. Seal
all openings in floor or wall wherever range is
installed.
I17.
Use pipe-joint compounds appropriate
for use with LP. gas to seal all gas
connections, tf flexible connectors are
used, be certain connectors are not kinked.
I1 8 ]
Open the shutoff valve in the gas
supply line. Wait a few minutes for the
•
gas to move through the gas line.
I1
"
jUse a brush and liquid detergent to test
• _
Jail gas connections for leaks. Bubbles
v
• laround gas connections will indicate a
leak. tf a leak appears, shut off gas valve controls
and adjust connections. Then check connections
again. NEVER TEST FOR GAS LEAKS WITH A
MATCH OR OTHER FLAME. Clean all detergent
solution from range.