Lexmark 5022-xxx Especificações do suporte - Página 2

Procurar online ou descarregar pdf Especificações do suporte para Impressora Lexmark 5022-xxx. Lexmark 5022-xxx 8 páginas.

Imprimir página

Unacceptable media

The following media types are not recommended for use with the printer:
•
Chemically treated media used to make copies without carbon paper, also known as carbonless papers,
carbonless copy paper (CCP), or no carbon required (NCR) paper
•
Preprinted media with chemicals that may contaminate the printer
•
Preprinted media that can be affected by the temperature in the printer fuser
•
Preprinted media that requires a registration (the precise print location on the page) greater than ±2.3 mm
(±0.09 in.), such as optical character recognition (OCR) forms
In some cases, registration can be adjusted with a program to successfully print on these forms.
•
Coated media (erasable bond), synthetic media, thermal media
•
Rough-edged, rough, or heavily textured surface media, or curled media
•
Recycled media containing more than 25% post-consumer waste that does not meet DIN19 309
•
Media weighing less than 60 g/m
•
Multiple-part forms or documents

Selecting media

Using appropriate media prevents jams and helps ensure trouble-free printing.
To help avoid jams and poor print quality:
•
Always use new, undamaged media.
•
Before loading media, know the recommended print side of the media. This information is usually indicated
on the media package.
•
Do not use media that has been cut or trimmed by hand.
•
Do not mix media sizes, types, or weights in the same source; mixing results in jams.
•
Do not use coated media unless they are specifically designed for electrophotographic printing.

Selecting preprinted forms and letterhead

Use these guidelines when selecting preprinted forms and letterhead:
•
Use grain long papers for best results for 60 to 90 g/m
•
Use only forms and letterhead printed using an offset lithographic or engraved printing process.
•
Avoid papers with rough or heavily textured surfaces.
Use papers printed with heat-resistant inks designed for use in xerographic copiers. The ink must be able to
withstand temperatures up to 180°C (356°F) without melting or releasing hazardous emissions. Use inks that
are not affected by the resin in toner. Inks that are oxidation-set or oil-based generally meet these requirements;
latex inks might not. When in doubt, contact the paper supplier.
Preprinted papers such as letterhead must be able to withstand temperatures up to 180°C (356°F) without
melting or releasing hazardous emissions.
2
(16 lb)
2
weights.
5022-xxx
1-7
General information