Jands 4Pak-D Manual do utilizador - Página 4

Procurar online ou descarregar pdf Manual do utilizador para Controlador Jands 4Pak-D. Jands 4Pak-D 8 páginas. Four channel controller/dimmer

Imprimir página
Layout
4
2
1.
Channel output sockets: The four output sockets connect to the lights.
2.
Overload circuit breaker: The circuit breaker protects the 4Pak-D from faults and overloading.
3.
Channel faders: These faders control the channel output levels. In scene mode these faders
control the level of four scenes.
4.
Master fader: Controls the overall level of the faders and the chaser.
5.
Flash buttons: Allow each channel or scene to be flashed to maximum.
6.
Rate fader: Controls the stepping speed of the chaser. In Scene mode this fader controls the level
of a fifth scene.
7.
Go/Load button: Activates the chaser. When the chaser is not activated the LED flashes to
indicate the chase rate; the LED is on when the chaser is active.
Direction button: Controls the direction of the chaser – forward, reverse, bounce.
8.
9.
Crossfade button: Creates a smooth fade in and out of each chaser step.
10. Audio button: Turns on the internal microphone for the audio-triggered chaser. The Rate fader
controls the minimum chase rate in the absence of sound.
11. Display: Provides information to the operator about various settings and parameters.
12. Display Mode button: Switches display between DMX start channel and various program
parameters.
13. + and - buttons: Change various program parameters and DMX start channel.
14. Exit button: Cancel or exit operations and delete various parameters.
15. Enter button: Confirm settings and record various parameters.
16. DMX sockets: Accepts DMX signals in and sends DMX to other linked 4Pak-Ds.
17. Function LEDs: Indicate DMX signal present, Master mode operation and RDM Identify
instruction received.
JANDS 4Pak-D
1
10
5
3
- 4 -
9
7
8
User Guide
16
17
12
13
11
15
14