Jands FP12 Manual de instruções - Página 2
Procurar online ou descarregar pdf Manual de instruções para Regulador de fluxo luminoso Jands FP12. Jands FP12 20 páginas. 12 channel, 2.4kva per channel (10a/240v) dimmer rack
Imprimir páginaContents
This product is approved for use in Europe and Australia/New Zealand and conforms to the following
standards:
European Norms
To
ensure
continued
Radiocommunications Act 1992, use only high quality data cables with continuous shield, and
connectors with conductive backshells. Examples of such cables are:
DMX:
©
JANDS ELECTRONICS PTY LTD 1999
All rights reserved
Information contained in this manual is subject to change without notice and does not
represent a commitment on the part of the vendor. JANDS ELECTRONICS PTY LTD
shall not be liable for any loss or damage whatsoever arising from the use of
information or any error contained in this manual.
It is recommended that all service and repairs on this product be carried out by JANDS
ELECTRONICS PTY LTD or its authorised service agents.
JANDS ELECTRONICS PTY LTD cannot accept any liability whatsoever for any loss
or damage caused by service, maintenance or repair by unauthorised personnel, or by
use other than that intended by the manufacturer.
JANDS FP Series dimmers must only be used for the purpose they were intended by
the manufacturer and in conjunction with this operating manual.
Disconnect mains power when not in use.
Manufactured in Australia by:
JANDS ELECTRONICS PTY LTD
40 Kent Rd
Locked Bag 15
Mascot
Australia
PHONE:
FAX:
INTERNET: www.jands.com.au
Revision 01 – 3 June 1999
EMC COMPLIANCE
EN 55014-1
EN 55014-2
EN 60335-1
compliance
with
Belden 8102
DISCLAIMER
NSW 2020
+61-2-9582-0909
+61-2-9582-0999
Australian / New Zealand
Standards
AS/NZS 1044
AS/NZS 4251.1
AS/NZS 3350.1
EMC
Directive
89/336
100% Aluminium foil screen, 65% Copper braid.
ACN 001 187 837
FP12 DIMMER
and
the
Australian
USER MANUAL
ii