Jands StageCL Manual de início rápido - Página 13

Procurar online ou descarregar pdf Manual de início rápido para Painel de controlo Jands StageCL. Jands StageCL 16 páginas. Led lighting control through

Imprimir página

Other controls

Snapshot

Press this button to take a 'snapshot' of the console output. The console will

hold that output until the button is pressed again. Only the Grand Master and

DBO controls have an effect on the Snapshot output. This means you can take a

snapshot, then adjust any other controls, including the fixture controls, without

affecting the look on stage. Once you have a new look ready you press the

snapshot button again and Stage CL crossfades to the new look over the

crossfade time.

Fixtures - Scenes

This button switches the 12 sets of fixture controls in and out of 'Scene'

mode. In Scene mode the 12 faders and flash buttons can be used to record and

play back scenes.

The LED above the Fixture / Scene button is on (Red) in Scene mode.

Page

This button loads an alternate set of fixtures or scenes onto the 12 faders and

flash buttons.

The LED above the Page button changes colour depending on the page loaded.

Crossfade Time

This control adjusts Time of all manually controlled crossfades, such as

activating/deactivating a scene or chase, except the Cuelist.

Rate

Turning this encoder overrides the Chase rate, allowing you to increase or

decrease the Chase playback rate on the fly.