Lexmark 810 Series Manual de instalação - Página 2

Procurar online ou descarregar pdf Manual de instalação para Impressora Lexmark 810 Series. Lexmark 810 Series 2 páginas. Color jetprinter;
Também para Lexmark 810 Series: Manual de início rápido (2 páginas), Manual de instalação (20 páginas)

Imprimir página

Make sure your computer is on.

Insert the CD.

Follow the instructions on your screen to

complete installation.

Setup Troubleshooting

Symptom:

Diagnosis:

The Power light is not lit

Is the power cord pushed all the way into the printer?

Is the printer connected to a working electrical outlet?

Software will not install

Is your operating system compatible with the printer?

Alignment page or test page will not print Is the printer on?

Do you see an error message on the monitor or flashing

lights on the printer?

Is your printer connected to your computer through another

device, such as a USB hub or switch box?

Did you remove the sticker and tape from the bottom of each

print cartridge?

Are the print cartridges installed properly?

Is the paper loaded correctly?

P/N 21G0070

E.C. 21G005

Attach the USB cable to your printer and computer.

If you inserted the CD and the install screen did not appear (Windows):

1 Click Cancel on any Add New Hardware screens.

2 Eject and reinsert the printer software CD.

If the printer software install screen does not appear:

a From your desktop, double-click My Computer (In Windows XP, click Start

b Double-click the CD-ROM drive icon. If necessary, double-click setup.exe.

c When the printer software install screen appears, click Install.

d Follow the instructions on the screen to complete the installation.

If you inserted the CD and the install screen did not appear (Mac):

1 From your desktop, double-click the Lexmark 810 Series Installer icon.

2 Double-click Install and follow the instructions on the screen.

Solution:

Disconnect the power cord from the wall outlet, and then

from the printer. Reconnect the power cord by pushing it all

the way into the connector on the printer, and then into the

wall outlet.

Connect the printer to an electrical outlet that other electrical

devices have been using.

The printer supports these operating systems:

• Windows 98

• Windows Me

• Windows 2000

• Windows XP

• Mac OS X version 10.1.5

• Mac OS X version 10.2.3 and later

Press the Power button. If the Power light does not come

on, see the "The Power light is not lit" symptom at the

beginning of this table.

See "Error messages troubleshooting" in your User's Guide.

Disconnect the USB cable from any other devices and

directly connect it between the printer and your computer.

For help, see step 12.

Remove the print cartridges, check for the sticker and tape

and then reinsert them. For help, see step 7 and step 8.

See step 10.

Important!

Click Cancel on the New Hardware screen.

Note: New Hardware screens appear only for Windows users. For Macintosh, continue to step 14.

My Computer).

Have a question?

• Refer to the User's Guide.

For Windows:

Click Start

Programs or All Programs

For Mac OS X:

1 From your desktop, double-click the Lexmark 810 Series folder alias.

2 Double-click the Lexmark 810 Series.help alias.

• Refer to the Lexmark Solution Center software.

1 Click Start

Programs or All Programs

2 Click the Troubleshooting tab on the left side of the screen.

• Visit our Web site:

http://support.lexmark.com/

• Call us at 1-800-332-4120.

Monday-Friday (9:00 AM - 9:00 PM EST)

Saturday (Noon-6:00 PM EST)

Note: Phone number and support times may change without notice.

Record the following information (located on your store receipt and the back of your printer) and have it ready

when you contact us so that we may serve you faster:

Machine Type number

Serial number

Date purchased

Store where purchased

Need more ink?

The following cartridges work with your printer.

• 31

• 32

• 33

• 34

• 35

Federal Communications Commission (FCC)

compliance information statement

This product complies with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. Refer to the

Lexmark 810 Series

User's Guide.

Lexmark 810 Series

Lexmark Solution Center.