Avatar Technologies VS-441S Manual de operação - Página 4
Procurar online ou descarregar pdf Manual de operação para Interruptor Avatar Technologies VS-441S. Avatar Technologies VS-441S 9 páginas. Hdmi 4x1 quad multi-viewer with seamless switcher
5. RS232: Connect the RS232 port to the PC or notebook by RS232 Cable.
6. DC 12V: Plug the 12V DC power supply into the unit and connect the adaptor to
AC wall outlet.
5.3 Rear panel (Extender Version)
1. Input: These slot is where you connect the HDMI source output from DVD,
PS3,Set-top Box and Note Book.
2. OUTPUT: The HDMI is where you connect the HDTV or monitor with HDMI
cable for input source display.The UTP port connect to CAT Receiver by CAT5e/6
cable for signal extend.The Coax is where you connect to the amplifier with
coaxial cable.
3. IR RX: Connect to the IR Receiver for IR signal reception. Ensure that remote
being used is within the direct line-of-sight of the IR receiver.
4. IR TX: Connect the IR Blaster cable included in the package for IR signal
transmission. Pace the IR blaster in direct line-of-sight of the equipment to be
controlled.
5. RS232: Connect the RS232 port to the PC or notebook by RS232 Cable.
6. DC 12V: Plug the 12V DC power supply into the unit and connect the adaptor to
AC wall outlet.
5.4 CAT Receiver(Extender Version)
1 DC 5V: Connect from 5V DC power supply into the unit and connect the adaptor
to an AC outlet.
2 IR RX: Connect to the IR Receiver for IR signal reception. Ensure that remote
being used is within the direct line-of-sight of the IR receiver.
3 IR TX: Connect the IR Blaster cable included in the package for IR signal
transmission. Pace the IR blaster in direct line-of-sight of the equipment to be
controlled.