Makita HM1801 Manual de instruções - Página 7
Procurar online ou descarregar pdf Manual de instruções para Ferramenta eléctrica Makita HM1801. Makita HM1801 8 páginas. Electric breaker
Também para Makita HM1801: Manual de instruções (10 páginas), Manual de instruções (8 páginas), Manual de instruções (20 páginas), Manual de instruções (12 páginas), Manual de instruções (12 páginas), Informações técnicas (18 páginas)
Imprimir página
Remove the cap rubber.
1
008624
Use a screwdriver to remove the brush holder caps. Take
out the worn carbon brushes, insert the new ones and
secure the brush holder caps.
1
006204
Lubrication
1
008494
1
008495
This tool requires no hourly or daily lubrication because it
has a grease-packed lubrication system. It should be
relubricated after every 6 months of operation. Send the
complete tool to Makita Authorized or Factory Service
Center
for
this
lubrication
circumstances require that you should lubricate it by
yourself, proceed as follows.
First, switch off and unplug the tool.
Remove the cap using a lock nut wrench 20 or hex
wrench 8, then replenish with fresh grease (60 g). Use
1. Cap rubber
1. Brush holder cap
2
2. Screwdriver
1. Cap
2
2. Lock nut wrench
20
1. Cap
2
2. Hex wrench 8
service.
However,
only
Makita
genuine
accessory). Filling with more than the specified amount
of grease (approx. 60 g) can cause faulty hammering
action or tool failure. Fill only with the specified amount of
grease.
1
006206
Reinstall the cap and secure with the wrench.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers, always
using Makita replacement parts.
ACCESSORIES
CAUTION:
These
accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Bull point
•
Cold chisel
•
Scaling chisel
•
Clay spade
•
Rammer
•
Safety goggles
•
Hammer grease
•
Hex wrench
•
Lock nut wrench
•
if
7
hammer
grease
1. Hammer grease
or
attachments
persons.
Only use
(optional
are
accessory or