Jandy Jandy Pro Series Manual do Proprietário - Página 7

Procurar online ou descarregar pdf Manual do Proprietário para Filtro de piscina Jandy Jandy Pro Series. Jandy Jandy Pro Series 12 páginas. Single element cartridge pool & spa cs filters
Também para Jandy Jandy Pro Series: Manual de instalação (16 páginas), Manual de instalação e operação (20 páginas), Manual do Proprietário (20 páginas), Manual (8 páginas), Manual de início rápido (2 páginas), Manual de instalação e operação (20 páginas), Instruções de instalação (2 páginas), Manual de instalação e operação (16 páginas), Manual de instalação e operação (16 páginas), Manual de instalação e operação (16 páginas)

Nicheless Underwater LED Lights | Owner's Manual

Figure 3.

Attach the assembled light and cable to the docking ring

Section 3.

Pro Series Nicheless LED Lights

NOTE The Jandy Pro Series Nicheless LED Lights are not compatible

with light dimmers. Do not wire the Jandy Pro Series Nicheless

Lights to any dimming circuitry.

To the extent allowed by local installation codes in effect in the installation

jurisdiction and capacity of the electrical equipment, multiple Jandy Pro

Series lights may be controlled with a single switch and transformer so

their colors may be synchronized.

Separate switches may be used to control the on/off and color functions

of each set of Jandy Pro Series Nicheless Lights (a 'set' being all the

lights wired to a common 12 VAC transformer). It is recommended that

these switches be located next to each other to facilitate simple color

synchronization when desired. If color synchronization is critical, switches

must be operated simultaneously.

3.1

Wiring to an AquaLink

The Jandy Pro Series Nicheless LED Lights can be controlled by an

AquaLink controller. Connect the transformer powering the lights to one

of the auxiliary relays in the AquaLink.

Refer to Figure 4 to connect the Jandy Pro Series Nicheless LED Lights to

the Power Center.

Wiring Options for Controlling Jandy

ENGLISH

Controller

Page 7