Gardena 4054-60 Manual rápido - Página 2

Procurar online ou descarregar pdf Manual rápido para Cortador de relva Gardena 4054-60. Gardena 4054-60 4 páginas.

GETTING STARTED WITH

THE GARDENA ROBOTIC LAWNMOWER

1. Installing the charging station

See chapters 3.3.1 and 3.4.1 in the supplied operator's manual or on the

GARDENA website (www.gardena.com).

1. Place the charging station on a flat, level surface where there is open space.

2. Connect the low voltage cable to the charging station and the power supply.

3. Connect the power supply to a 100-240 V wall socket.

4. Press the ON/OFF button to turn the product on. Place the product in the charging

station to charge the battery while the boundary wire is laid.

NOTE: Do not continue with any product settings before the installation is complete

(1-4).

2. Laying the boundary wire

See chapter 3.3.3 in the supplied operator's manual or on the

GARDENA website (www.gardena.com).

1. Lay the boundary wire so that it forms a loop around the

whole work area.

2. Make an eyelet at the point on the boundary wire where the

guide wire is later connected.

1. STOP button

2. LED for function check of the

boundary and guide wires

3. Charging station

4. Display

5. Keypad

6. ON/OFF button

7. Start button

P01_P02_QG_USEN.indd 2

0 cm / 0"

10 cm / 4"

30 cm / 12

10 cm / 4"

35 cm / 14"

2019-02-06 14:50:01