Gardena 5041-20 Manual do operador - Página 4

Procurar online ou descarregar pdf Manual do operador para Cortador de relva Gardena 5041-20. Gardena 5041-20 10 páginas. Battery lawnmower
Também para Gardena 5041-20: Manual do operador (17 páginas), Manual do operador (10 páginas)

Imprimir página

Original instructions.

This product may be used under super-

vision, or if instruction regarding the safe

use of the product has been provided and

the resulting dangers have been understood,

by children aged 8 and above, as well as by per-

sons with physical, sensory or mental disabilities

or a lack of experience and knowledge. Children

must not be allowed to play with the product.

Cleaning and user maintenance must not be

performed by children without supervision.

The use of this product by young people under

the age of 16 is not recommended.

Intended use:

The GARDENA Battery Lawnmower is used to cut lawn in private

domestic gardens and allotments.

The product is not intended for continuous operation.

DANGER! Risk of injury! Do not use the product to cut bushes,

hedges, shrubs, to cut of climbers or grass on roofs or balcony

boxes, to chop up branches, twigs and to level irregularities in the

soil. Do not use the product on a slope steeper than 20° maximum.

1. SAFETY

IMPORTANT!

Read the operator's manual carefully before use and keep for future

reference.

If not used properly this product can be dangerous. The warnings and safety

instructions must be followed to ensure reasonable safety and efficiency in using

this product. The operator is responsible for following the warnings and instruc-

tions in this manual and on the product. Never use the product unless the guards

pro vided by the manufacturer are in the correct position. Careless or incorrect

use of this product can result in injury to the user or others. Read and understand

the content of the operator's manual. Keep the manual for future reference.

Symbols on the product:

Read operator's manual.

Keep other persons away.

Beware of sharp blades. Blades continue to rotate

after the engine is switched off.

Remove safety key before you do maintenance or

if the cable becomes damaged or cut.

Secure the working area before starting to work.

Watch out for hidden cables.

Fire risk! Short-circuit!

Do not connect the contacts of the battery with

metal components.

Do not let the product become wet with rain

or other moisture.

General safety warnings

Electrical safety

DANGER! Electric shock!

Risk of injury due to electric shock.

The product must be supplied through a residual current device (RCD)

having a rated residual operating current not exceeding 30 mA.

DANGER! Risk of injury!

Cut injury when the blade turns or the product starts

accidentally.

Remove the safety key before you do maintenance or you replace

parts. Thereby the removed safety key must be in the visual range.

Training

1. Read the instructions carefully. Be familiar with the controls and the correct

use of the machine.

2. Never allow children or people unfamiliar with these instructions to use the

machine. Local regulations can restrict the age of the operator.

3. Never operate the machine while people, especially children, or pets are

nearby.

4. Keep in mind that the operator or user is responsible for accidents or haz-

ards occurring to other people or their property.

Preparation

1. While operating the machine always wear substantial footwear and long

trousers. Do not operate the machine when barefoot or wearing open

sandals. Avoid wearing clothing that is loose fitting or that hanging cords

or ties.

2. Thoroughly inspect the area where the machine is to be used and remove all

objects which can be thrown by the machine.

3. Before using, always visually inspect to see that the blade, blade bolt and the

blade assembly are not worn or damaged. Replace worn or damaged com-

ponents in set to preserve balance. Replace damaged or unreadable labels.

4. Before use check the supply and extension cord for signs of damage or

aging. If the cord becomes damaged during use, disconnect the cord from

the supply immediately.

DO NOT TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY.

Do not use the machine if the cord is damaged or worn.

Operation

1. Operate the machine only in daylight or in good artificial light.

2. Avoid operating the machine in wet grass.

3. Always be sure of your footing on slopes.

4. Walk, never run.

5. Mow across the face of slopes, never up and down.

6. Exercise extreme caution when changing direction on slopes.

7. Do not mow excessively steep slopes.

8. Use extreme caution when reversing or pulling the machine towards you.

9. Stop the blade(s) if the machine has to be tilted for transportation when

crossing surfaces other than grass, and when transporting the machine to

and from area to be used.

10. Never operate the machine with defective guards or shields, or without safety

devices, for example deflectors and/or grass collector, in place.

11. Switch on the motor carefully according to instructions and with feet well

away from the blade(s).

12. Do not tilt the machine when switching on the motor, except if the machine

has to be tilted for starting. In this case, do not tilt it more than absolutely

necessary and lift only the part, which is away from the operator.

13. Do not start the machine when standing in front of the discharge opening.

14. Do not put hands or feet near or under rotating parts. Keep clear of the dis-

charge opening at all times.

15. Do not transport the machine while the power source is running.

16. Stop the machine, and remove the disabling device. Make sure that all mov-

ing parts have come to a complete stop

– whenever you leave the machine,

– before clearing blockages or unclogging chute,

– before checking, cleaning or working on the machine,

– after striking a foreign object. Inspect the machine for damage and make

repairs before restarting and operating the machine;

if the machine starts to vibrate abnormally (check immediately)

– inspect for damage,

– replace or repair any damaged parts,

– check for and tighten any loose parts.

Maintenance and storage

1. Keep all nuts, bolts, and screws tight to be sure the machine is in safe

working condition.

2. Check the grass collector frequently for wear or deterioration.

3. On machines with multi blade, take care as rotating one blade can cause

other blades rotate.

4. Be careful during adjustment of the machine to prevent entrapment of the

fingers between moving blades and fixed parts of the machine.

5. Always allow the machine to cool down before storing.

6. When servicing the blades be aware that, even though the power source is

switched off, the blades can still be moved.

7. Replace worn or damaged parts for safety. Use only genuine replacement

parts and accessories.