Gardena 1422 Manual de Instruções - Página 4

Procurar online ou descarregar pdf Manual de Instruções para Bomba de água Gardena 1422. Gardena 1422 16 páginas. Garden pump

Imprimir página

3. Initial Operation

Setting up your Garden Pump: The site must be firm and solid in order to ensure safe and sturdy

Connecting hose

to suction side:

Connection hose

to delivery side:

4. Operation

Filling the pump:

operating conditions for the pump.

Position the pump at a safe distance from the liquid to be

pumped.

Don't use any hose connection system fittings on the suction side!

A vacuum-resistant suction hose must be used

The connection pieces on the intake and output sides must

only be tightened by hand !

• e.g. GARDENA Suction Unit, art. no. 1411.

In order to reduce the suction time, it is advisable to use a suction

hose with backflow preventer avoiding automatic draining of the

suction hose when the pump is stopped.

1. Screw a vacuum-resistant suction hose airtight onto the con-

nector

on the suction side of the pump

2. For suction heights exceeding 4 m also secure the suction

hose (e.g. by fastening it to a wooden post).

This relieves the pump of the weight of the suction hose.

Both pump connectors k

thread to which 13 mm (1/2"), 19 mm (3/4") and 16 mm (5/8")

hoses can be connected by using GARDENA hose connection

system fittings. The back pump connector is closed with an end

cap. Unscrew the end cap for connecting two hoses.

Best results regarding the delivery capacity of the pump are achie-

ved when connecting 19 mm (3/4") hoses in conjunction with e.g.

• GARDENA Pump Connection Set, art. no. 1752,

or when using 25 mm (1") hoses with fittings available from your

sanitary dealer.

Connect the pressure hose to the connector k

side

When connecting simultaneously more than 2 hoses/accessories

we recommend application of the

• GARDENA Twin-Tap Connector or Four Channel Water

Distributor art. no. 1210 / 1194,

which can be screwed directly onto the delivery side connection

Warning ! Electric shock !

Risk of injury due to electric shock.

Disconnect from the mains before filling the

Garden Pump.

Dry-Running

Before each operation, fill the pump to over-

flowing with approx. 2 to 3 l of the liquid to be

pumped!

1. Unscrew the screw fitting

2. Fill the pump via the filler cap

2 to 3 l of the liquid to be pumped.

3. Tighten the screw fitting

use pliers).

are equipped with a 33.3 mm (G1)

of the filler cap

to overflowing with approx.

of the filler cap

on the delivery

by hand.

by hand (do not