Avaya IP Office 20DT Manual do utilizador - Página 8
Procurar online ou descarregar pdf Manual do utilizador para Telefone IP Avaya IP Office 20DT. Avaya IP Office 20DT 18 páginas.
Também para Avaya IP Office 20DT: Manual do utilizador (18 páginas), Manual do utilizador (18 páginas)
Imprimir página
Page 8 - Set-Up
Set-Up
Profiles
Your 20DT handset can be set-up for two user-defined profiles.
• Indoors (1) e.g. for office working
• Outdoors (2) e.g. for use in a manufacturing environment.
Within each profile you can set-up different parameters for:
• Back Lighting On/Off: See page 8.
• Start Volume: See page 9.
• Ringer Tone: See page 10.
• Ringer Volume: See page 10.
• B-Answer On/Off: See page 10.
• Key Click On/Volume: See page 12.
• Vibrator On/Off: See page 12.
• Out of Range Indicator: See page 12.
You can also set your DECT 20DT handset to operate in a totally silent mode
(see page 8).
To select Profile 1 or 2:
1. Press MENU* and
2. Press > until required profile appears.
3. Press
* Note: On older menu structures (see pages 3 and 4), after pressing MENU,
Silent Mode
If you do not want your 20DT to ring when an incoming call is presented, you can
select Silent Mode (not available when twinned with a desk top phone). You can
also Mute your microphone during a call (see page 9).
1. Press MENU followed by SILENT. SILENT appears and your 20DT will vibrate
2. To return to normal use, repeat the above. SILENT disappears and a tone is
Backlight Display
You can select if your 20DT handset display is to be backlit.
1. Press MENU* and
2. Press > until required profile appears and then press
3. Press > until BACKLIGHT appears and then press
4. When done, press
* Note: On older menu structures (see pages 3 and 4), after pressing MENU,
Page 8 - Profiles
All manuals and user guides at all-guides.com
. SET PROFILE/PROFILE 1 appears.
to select profile and continue with setting up of the parameters (see
above). Press MENU to finish.
press >to display PROFILE SET UP. Press
profile appears. Press
when incoming calls are presented. Refer to page 12 for details on how to turn
the vibrating option on.
given.
. SET PROFILE/PROFILE 1 appears.
(Use < and > to select ON or OFF.)
to save and MENU to finish.
press >to display PROFILE SET UP. Press
profile appears. Press
and continue from step 3.
.
and continue from step 2.
IP Office - 20DT Handset User's Guide
40DHB0002UKCH Issue 4 (27th October 2003)
and > until required
.
and > until required