Gardena 6000/3 S Manual de Instruções - Página 4

Procurar online ou descarregar pdf Manual de Instruções para Bomba de água Gardena 6000/3 S. Gardena 6000/3 S 10 páginas. Submersible pressure pump

Application:

Float Switch Adjustment:

Manual Operation:

Automatic Operation:

4. Maintenance

1. Fasten the supplied rope to the loop for fastening rope

2. Always submerge the pump carefully in the well or other water

reservoirs, using the supplied fastening rope (min. submersion

depth 20 cm).

In order to avoid contaminations, the pump should not be placed

directly on the ground. It must hang freely min. 30 cm above

ground, secured to the fastening rope.

The fastening rope must be secured.

When using the pump in deep wells and shafts (of more than

approx. 5 m), the power cable

clamps alongside the fastening rope.

The float switch

height of approx. 63 cm (model 6000/3 S) / 70 cm (model 6000/5 S)

and automatically switches off at a water height of approx. 5 cm

(model 6000/3 S) / 9 cm (model 6000/5 S). By fixing the float

switch cable to the float switch lock

can be adjusted individually.

In case of manual operation the Submersible Pressure Pump

starts when the power cable has been connected and the float

switch has been lifted.

After having connected the power cable, the pump is switched on

automatically at a definite water height (cut-in height) and swit-

ches off as soon as the water level drops down to a definite water

height (cut-out height).

Care, Storage Caution !

First always unplug the pump before working on it !

The GARDENA Submersible Pressure Pumps are virtually mainten-

ance-free. To avoid reduction of the pump's output, it is advisable

to check regularly the intake sieve at the suction base

contamination and clean it, if necessary. In case of contamina-

tion, the suction base can be taken off by unscrewing the 8 cross

recessed head screws. Thus, the turbine space or the intake sieve

at the suction base can be cleaned.

For safety reasons, any other parts of the pump

may only be disassembled by the GARDENA Service

Centre.

is to be guided by means of

automatically switches on the pump at a water

, the cut-in/cut-out height