Gardena 6000/4 Manual de Instruções - Página 2

Procurar online ou descarregar pdf Manual de Instruções para Bomba de água Gardena 6000/4. Gardena 6000/4 9 páginas. Submersible pressure pump
Também para Gardena 6000/4: Manual de Instruções (14 páginas), Manual de Instruções (14 páginas), Manual do operador (9 páginas)

Imprimir página

GARDENA Submersible Pressure Pump 5500/3;

6000/4

Welcome to the garden with GARDENA ...

Translation of the original German operating instructions.

Please read the operating instructions carefully and observe the

notes given. Use the instructions to familiarise yourself with the

submersible pressure pump, its correct use, and the notes on

safety.

For safety reasons, children under 16 as well as persons not

familiar with these operating instructions should not use this

submersible pressure pump. Persons with reduced physical or

mental abilities may use the product only if they are supervised

or instructed by a responsible person.

v Keep these operating instructions in a safe place.

Contents:

1. Area of application of your GARDENA

Submersible Pressure Pump . . . . . . . . . . . . . . . . . . . . . . . . . 10

2. Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

3. Initial Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

4. Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

5. Putting into Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

6. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

7. Trouble-Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

8. Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

9. Available accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

10. Service / Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

1. Area of application of your GARDENA

Submersible Pressure Pump

The GARDENA Submersible Pressure Pump is intended for the

Purpose:

private use in house and hobby gardens. It is intended for

draining water from fountains, cisterns and other water reservoirs

or for operating irrigation equipment and systems.

Liquids to be pumped:

The GARDENA Submersible Pressure Pump must only be used to

pump clear, fresh water.

The pump is watertight and is submerged in water

(for max. submersion depth, see 8. Technical specifications).

The pump is equipped with an integrated check valve, which

prevents automatic drainage of the pressure hose when the pump

is shut down.

Please note:

Salt water, contaminated water, corrosive, easily flammable,

or explosive substances (for example gasoline, petroleum,

cellulose thinner), oil, heating oil, and foodstuffs may not be

conveyed. The water temperature may not exceed 35° C.

2. Safety instructions

Electrical Safety:

DANGER! Electric shock!

With a cut off mains plug, moisture can get

into electrical parts via the mains cable and

cause a short circuit.

v Never cut the mains plug off (e. g. to feed

through wall).

v Don't use the power cable for plugging

off.

DANGER ! Electric shock!

A damaged pump must not be used.

v In case of damage, please have the pump

checked by our GARDENA Service Centre.

v Before operating the pump, first make

a visual check, if there is any damage of

the pump (esp. regarding power cable

and plug).

According to DIN VDE (German Electrical

Engineers' Association) 0100, submersible

pressure pumps may only be used in swim-

ming pools, garden ponds, and fountains

if the pump is operated via a residualcurrent

device with a residual-current rating of

≤ 30 mA. The pump must not be operated

when there are persons in the swimming

pool or garden pond.

For safety reasons we recommend that

you always operate the submersible pressure

pump via a residual-current device

(DIN VDE 0100-702 and 0100-738).

v Please contact your electrician.

The cable length must be at least 10m.

The power cable of the Submersible Pressure

Pump must be connected to a socket which

is positioned at a height of max. 1.10m

(measured from ground). Take care that the

power cable leads downwards.

Data indicated on the type plate must match

technical data of the mains supply.

Only use extension cables authorised in

accordance with HD 516.

v Consult your qualified electrician.

v Take care that the electrical connections

are made within dry area, protected from

flooding.

v Keep mains plug dry.

Protect plug and power cable from heat, oil

and sharp edges.

The power cable must not be used for mount-

ing or relocating the pump. For submerging or

lifting / securing the pump, please use the

fastening rope.

In Austria:

In Austria, according to ÖVE B/ EN 60 555

part 1 to 3, pumps which are used in swim-

ming pools and garden ponds, and equipped

with firm power cable should be fed via an

ÖVE approved isolating transformer - rated

voltage must not exceed 230 V.

In Switzerland:

In Switzerland mobile appliances which

are used outdoors, must be connected via

a residual-current device.

Notes on use:

When connecting the pump to the water

supply system, the country-specific sanitary

regulations must be observed to prevent

water not of drinking water quality being

drawn back in.

v If necessary, contact your sanitary expert.

Sand and other abrasive substances cause

increased wear and reduce the pump's output.

During operation, the pump must always

be submersed in the water up to the minimum

submersion depth (see 8. Technical

specifications).

Do not allow the pump to run for more than

10 minutes against the closed pressure side

(e.g. closed valve, closed dispenser etc.).