Gardena FP 2500 E Manual de Instruções - Página 6

Procurar online ou descarregar pdf Manual de Instruções para Bomba de água Gardena FP 2500 E. Gardena FP 2500 E 11 páginas. Fountain pump set
Também para Gardena FP 2500 E: Manual de Instruções (13 páginas), Manual de Instruções (12 páginas), Manual de Instruções (12 páginas)

Imprimir página

7. Troubleshooting

Cleaning the Pump :

Fault

No water feature operating

Reduced water feature

Pump shuts down after

a short time

In the event of other faults please contact GARDENA Service.

Repairs should only be carried out by GARDENA service centres or dealers

authorised by GARDENA.

8. Accessories

GARDENA

Underwater lights

GARDENA

radio control set

DANGER ! Electric shock !

V Disconnect the mains plug of the pump before

carrying out maintenance work !

1. Remove the pump from the filter housing (see 6. Maintenance).

2. Turn the pump housing

off the motor housing

3. Pull the impeller

4. Push the cleaned impeller

5. Press the pump housing

and turn it clockwise. (Bayonet fastening).

6. Reassemble the pump into the filter housing (see

6. Maintenance).

Possible cause

Mains plug not plugged in.

Regulating valves are closed.

Water bell or fleur-de-lis screwed v Unscrew water bell or fleur-

too far into the nozzle tube.

Impeller unit is blocked.

Water feature insert is dirty.

Filter housing / filter bowls dirty.

Water temperature too high.

Illuminate water features and

the edges of the pond.

Start water features and lighting

from the terrace or your living

room.

anticlockwise and pull it vertically

(Bayonet fastening).

out of the motor housing

back into the motor housing

vertically on to the motor housing

Remedy

v Plug in mains plug.

v Open regulating valves.

de-lis slightly out of the

nozzle tube.

v Clean pump.

v Clean water feature insert

and nozzle pipe.

v Clean filter housing / filter

bowls.

v Maximum water

temperature is 35 °C.

Art.-Nr. 7952 / 7954

Art.-Nr. 7874

and clean it.