Gardena 2402 Manual de Instruções - Página 5

Procurar online ou descarregar pdf Manual de Instruções para Aparador Gardena 2402. Gardena 2402 15 páginas. Turbotrimmer

Imprimir página

Starting your Turbotrimmer :

Trimming along lawn edges

and in awkward places :

Filament feed (Tip mechanism

for automatic filament feed) :

5. Maintenance

Risk of injury !

Cleaning the cover

and ventilation slots :

1. Press the start button

The Turbotrimmer starts.

2. Release the start button

The Turbotrimmer switches off.

1. For vertical cutting, loosen the tightening

nut

, turn the additional handle

and then tighten the nut

2. Swivel the plant guard

the park position until it clicks into place.

3. Lift the Turbotrimmer by the handle

and additional handle

cutting position.

4. When trimming between paving stones,

hold the Turbotrimmer so that the cutting

filament moves slightly above the paved

ground.

The filament is lengthened automatically when the motor is

running using a tip mechanism. A clean cut is only achieved

with the maximum filament length.

1. Leave the motor running.

2. Hold the cutting head

ment cassette

times in succession (approx. 3 times) (avoid applying sustained

pressure to the Turbotrimmer).

The filament is lengthened automatically. Listen for the audible

switching action. The filament limiter

the correct length.

There is a risk of injury from the cutting filament !

V Always unplug the mains plug of the Turbotrimmer be-

fore carrying out maintenance work !

Risk of injury and risk of damage to property !

V Never clean the Turbotrimmer under running water or

with a water jet (in particular a high pressure water jet).

The ventilation slots must always be free of dirt.

v Remove any grass and dirt from the

cover

and ventilation slots

each use.

on the handle

180 °

again by hand.

backwards to

and turn to the

parallel to the ground and tap the fila-

of the Turbotrimmer on the ground several

adjusts the filament to

after

Cutting position

Park position