Gardena 9827-20 Manual do operador - Página 7

Procurar online ou descarregar pdf Manual do operador para Aparador Gardena 9827-20. Gardena 9827-20 12 páginas. Battery trimmer

Imprimir página

(17)

If the cassette cover

cannot be attached, turn the filament cassette

back and forth, until the filament cassette

(20)

cassette holder

5. STORAGE

To put into storage:

The product must be stored away from children.

1. Remove the battery.

2. Charge the battery.

3. Clean the trimmer, the battery and the battery charger

(see 4. MAINTENANCE).

4. Store the trimmer, the battery and the battery charger in a dry,

enclosed and frost-free place.

Disposal:

(in accordance with RL2012/19/EC)

The product must not be disposed of to normal household waste.

It must be disposed of in line with local environmental regulations.

IMPORTANT!

v Dispose of the product through or via your municipal recycling

collection centre.

Disposal of the battery:

The GARDENA battery contains lithium-ion cells that should not

be disposed of with normal household waste at the end of its life.

IMPORTANT!

v Dispose of the batteries through or via your municipal recycling

collection centre.

1. Discharge the lithium-ion cells completely (contact the GARDENA

Service).

2. Protect the contacts on the lithium-ion cells against short circuits.

3. Dispose of the lithium-ion cells properly.

6. TROUBLESHOOTING

DANGER! Risk of injury!

Cut injury when the trimmer starts accidentally.

v Wait for the cutting filament to stop and remove the battery

before you troubleshoot the trimmer.

Problem

Possible Cause

Trimmer does not start

Battery is not put completely

into the battery holder.

On LED is off.

Trimmer does not cut

Cutting filament is worn or too

short.

Filament cassette is empty.

Cutting filament is pulled into

the cassette or welded.

Trimmer can no longer be

Start lever is stuck.

stopped

Cutting filament cannot be

Cutting filament became too

extended or is used quickly

dry and brittle (e. g. during the

winter).

Cutting filament frequently

touched hard objects.

Product stops

There's long garden cuttings

[ Fig. T1 ]

wrapped around the filament

cassette holder

(19)

is completly in the filament

Li-ion

Remedy

v Put the battery completely

into the battery holder until

it audibly engages.

v Push the On/Off button.

v Extend the cutting filament

(see 3. OPERATION

"To extend the cutting fila-

ment (Tip mechanism)" ).

v Replace the filament cassette

(see 4. MAINTENANCE

"To replace the filament

cassette") .

v Pull the cutting filament

out of the filament cassette

(see above).

v Remove the battery and

loosen the start lever.

v Put the filament cassette in

water for approx. 10 hours.

v Prevent the cutting filament

from touching hard objects.

v Remove the cuttings.

(20)

Problem

(19)

Error-LED

on the control

panel flashes [ Fig. T2 ]

Error-LED

on the battery

flashes [ Fig. T3 ]

Error-LED

on the battery

illuminates [ Fig. T3 ]

Charging control lamp

(Lc)

on the charger does not

illuminate [ Fig. T4 ]

(Lc)

Charging control lamp

the charger flashes rapidly

(4 times per second) [ Fig. T4 ]

(Wc)

Error-LED

on the charger

flashes [ Fig. T4 ]

(Wc)

Error-LED

on the charger

illuminates [ Fig. T4 ]

NOTE: For any other malfunctions please contact the GARDENA service depart-

ment. Repairs must only be done by GARDENA service departments or specialist

dealers approved by GARDENA.

7. TECHNICAL DATA

Battery Trimmer

Unit

Cutting filament thickness

Cutting width

Rpm of filament cassette

rpm

(normal / Eco)

Cutting filament supply

Cutting filament feed

Weight (without Battery)

Sound pressure level L

dB (A)

Uncertainty k

Sound power level L

measured/guaranteed

dB (A)

Uncertainty k

Hand/arm vibration a

m/s

vhw

Uncertainty k

Measuring process complying with:

NOTE: The stated vibration emission value has been measured according to

a standardized test procedure and can be used for comparison of one electric

power tool with another. It can also be used for preliminary evaluation of expo-

sure. The vibration emission value can vary during actual use of the electric power tool.

System Battery /

Unit

smart Battery BLi 40

Max. Battery voltage

V (DC)

Battery capacity

Battery charging time

min.

80 % / 100 % (approx.)

Battery Charger QC40

Unit

Mains voltage

V (AC)

Mains frequency

Rated Power

Output voltage

V (DC)

Max. output current

Possible Cause

Remedy

Over current, engine is

v Remove the battery and

blocked.

remove the obstacle.

Over temperature.

v Let the product cool down.

Start lever is pushed while the

v Release the start lever. Push

On / Off button is pressed.

the On / Off button (Error-LED

is off). Push the On / Off but-

ton again (On LED illumi-

nates)

Under voltage.

v Charge the battery.

Battery temperature is out of

v Use the battery in surround-

range.

ings where temperatures are

between 0 °C and 40 °C.

Battery error / battery defective. v Contact the GARDENA

Service.

Battery charger or charging

v Connect the battery charger

cable are not connected

and charging cable correctly.

correctly.

Battery temperature is out of

v Use the battery in surround-

range.

ings where temperatures are

between 0 °C and 40 °C.

Battery error.

v Remove the battery and

check that you use an original

GARDENA battery.

Temperature inside the

v Contact the GARDENA

charger is too high.

service.

Value (Art. 9827)

1.6

8500 / 7500

Tip mechanism

3.2

93 / 94

< 2.5

1.5

EN 50636-2-91

RL 2000/14/EC

Value (Art. 9842 / 19090) Value (Art. 9843 / 19091)

(The max. initial no-load

voltage of the battery

voltage of the battery is

is 40 V, the nominal

40 V, the nominal voltage

voltage is 36 V)

is 36 V)

2.6

4.2

65 / 90

105 / 140

Value (Art. 9845)

230

100

1.8