Avaya 3606 Manual do utilizador - Página 12

Procurar online ou descarregar pdf Manual do utilizador para Telefone Avaya 3606. Avaya 3606 16 páginas.
Também para Avaya 3606: Manual de referência rápida (1 páginas), Manual do utilizador (16 páginas)

Imprimir página

Avaya 3606 Wireless IP Telephone User's Guide

The wireless telephone's LCD panel displays information about the status

of your wireless telephone and prompts you about features.

If the wireless telephone's Battery Pack is low, you will hear a soft beep

and see the "BATT" or "Low Battery" message in the display.

Improper disposal of Battery Packs can damage the environment. Dispose

of batteries properly.

You can control the wireless telephone's volume level and the type of ring.

To protect the wireless telephone, use a carrying case.

General Care of the Wireless

Telephone and Chargers

The wireless telephone and chargers have been designed to withstand the wear

and tear of normal use; however, avoid dropping the wireless telephone or

knocking it against hard surfaces. Carrying the wireless telephone in a holster or

carrying case will help to protect it.

There are no serviceable parts in the wireless telephone or chargers. You should

not open the wireless telephone case nor disassemble the chargers. Doing so will

void your warranty.

Turn off the wireless telephone and unplug the charger before you clean them.

Never immerse either in water. Clean the exterior surfaces, including the charging

contacts, with a cloth that has been slightly moistened with water. Take care not to

exert undue pressure on the charger electrical contacts while wiping.

Wiping the handset surface with a water-dampened cloth or paper towel will

remove most films or residues. If the soiling is too stubborn for plain water, a mild

detergent solution may be used. Be sure to wipe away any detergent residue with

a clean water-dampened cloth.

The wireless telephone may be cleaned with any general-purpose household

glass and surface-type cleaner. DO NOT SPRAY THE HANDSET DIRECTLY!

Isopropyl alcohol may be used occasionally applied by a cloth or paper towel.

When using alcohol, do not rub the keypad characters vigorously. Doing so will

significantly degrade legibility.

Issue 2 February 2003