Gardena 1805 Manual de Instruções - Página 8
Procurar online ou descarregar pdf Manual de Instruções para Equipamento para relva e jardim Gardena 1805. Gardena 1805 11 páginas. Water timer electronic
Imprimir página
13.2 GARDENA Soil Moisture Sensor (Fig. E)
Together with the GARDENA Soil Moisture Sensor Art. No. 1187 watering
is controlled considering the soil moisture.
Assembly
The Soil Moisture Sensor is connected to the socket
the control unit (Fig. A).
How it works
If the connected Soil Moisture Sensor indicates there is sufficient moisture
then the watering program is either interrupted or not initiated.
Note : Manual watering (On, Off) is still possible.
13.3 GARDENA Rain Sensor (Fig. F)
Together with the GARDENA Rain Sensor Art. No. 1189 watering is
controlled considering natural precipitation.
Assembly
The Rain Sensor, as an alternative to the Soil Moisture Sensor, can be
connected to the connection socket
(Fig. A).
How it works
If the connected Rain Sensor indicates an appropriate amount of rain,
the watering program is interrupted or not initiated.
Note : Manual watering (On, Off) is still possible.
13.4 GARDENA Automatic Water Distributor (Fig. G)
Connecting the GARDENA Automatic Water Distributor (Art. No. 1198)
allows you to control up to 6 watering lines with your water timer electronic
(max. 3 lines per day).
Ideal in areas with not enough water flow to operate all areas at the same
time. Allows the operation of each channel one after the other.
14. Faults
Faults
Possible cause
Manual opening
Battery capacity
using "On" not /
too low.
not completely
Tap turned off.
14
8
on the back of
8
on the back of the control unit
Remedy
Insert a new alkaline
battery.
Turn on tap.
Faults
Possible cause
Watering program
Battery capacity
do not run.
too low ; water timer
is beeping.
Watering program
turned off. Run Time
set to Off or Reset.
Valve was opened
manually and closed
automatically after
30 minutes.
Tap turned off.
Connected Soil
Moisture Sensor /
Rain Sensor indicates
adequate amount of
moisture.
Watering program
Water timer has
run at the wrong
been reset.
time.
Battery flat after
Not an alkaline
working for a
battery.
short time.
Device not working.
Battery inserted
incorrectly.
Battery is flat.
If you have any problems with your Water Timer, please contact our
Customer Service or return the defective unit together with a short de-
scription of the problem directly to one of the GARDENA Service Centres
listed on the back of this leaflet.
If covered under warranty,
please include a copy of the receipt.
Remedy
Insert a new alkaline
battery.
Set the Run Time
to the required
watering time.
Run Time set to On.
Set the Run Time
back to the required
watering time.
Turn on tap.
Check the moisture
level setting on the
Soil Moisture Sensor.
Determine the new
starting time. Set the
starting time (see
"Setting the watering
data").
Use an alkaline
battery.
Observe the
+ / – markings.
Insert a new alkaline
battery.
15