HIKVISION HiWatch Series Manual de início rápido - Página 7
Procurar online ou descarregar pdf Manual de início rápido para Hardware de rede HIKVISION HiWatch Series. HIKVISION HiWatch Series 18 páginas. Hd turret and bullet camera
Também para HIKVISION HiWatch Series: Manual de início rápido (15 páginas), Manual de início rápido (20 páginas), Como fazer (4 páginas), Manual do utilizador (15 páginas), Manual do utilizador (15 páginas)

Step 3 Connect the power cable to the HDD.
Figure 2-3 Connect Power Cable
Step 5 Re-install the cover of the DVR and fasten screws.
2.3 RS-485 and Controller Connection
To connect PTZ to the DVR:
Step 1 Disconnect pluggable block from the
RS-485 terminal block.
Step 2 Press and hold the orange part of the
pluggable block, insert signal cables
into slots, and release the orange
part. Ensure signal cables are in tight.
Step 3 Connect A+ on PTZ to D+ on terminal
block and B- on controller to D- on
terminal block. Fasten stop screws.
Step 4 Connect pluggable block back into
terminal block.
Digital Video Recorder Quick Start Guide
Figure 2-2 Connect Data Cable
Typical Connection:
Make sure both the controller and DVR are grounded.
Step 4 Place the HDD on the bottom of the
device and then fasten the screws on the
bottom to fix the HDD.
Figure 2-4 Fix Hard Disk
Figure 2-5 Controller Connection A
6