Gardena AccuCut Li 9850 Manual de instruções - Página 5
Procurar online ou descarregar pdf Manual de instruções para Equipamento para relva e jardim Gardena AccuCut Li 9850. Gardena AccuCut Li 9850 13 páginas.
Também para Gardena AccuCut Li 9850: Manual de instruções (14 páginas), Manual de instruções (13 páginas)
Imprimir página
2. INSTALLATION
Initial Operation:
1
To charge the battery:
4
3. OPERATION
To start the Grass Shear:
6
DANGER! Risk of physical injury!
Cut injury when the product starts accidentally.
v Before you initially operate the product, make sure that
the protective cover
2
The battery should be fully charged before using for the first time.
Charging time (see 7. TECHNICAL DATA).
The lithium-ion battery can be re-charged in any state of charge,
and the charging process can be interrupted at any time without
damaging the battery (no memory effect).
The product cannot be started during charging.
WARNING!
Incorrect mains voltage damages batteries and the
battery charger.
v Ensure the correct mains voltage.
3
1. Connect charging cable
2. Connect battery charger
During charging, the jack
When the jack
Check the charge status regularly while charging.
3. First pull the charging cable
the battery charger from the electrical socket.
5
When there is a sharp fall in the power of the battery, the product
switches off and the battery needs to be charged.
DANGER! Risk of physical injury!
R isk of injury if the product does not stop when you
release the start button.
v D o not bypass the safety devices or switches. For example
do not attach the starting lock-out
the handle.
7
1
is slid over the blade
3
to the jack
5
to an electrical socket.
4
flashes green. The battery is charged.
4
lights up green, the battery is fully charged.
3
out of the jack
2
.
4
of the Battery Shear.
4
and then unplug
6
or start button
7
to
13