Gardena ES 450/30 4060 Manual de Instruções - Página 4
Procurar online ou descarregar pdf Manual de Instruções para Equipamento para relva e jardim Gardena ES 450/30 4060. Gardena ES 450/30 4060 8 páginas. Electric lawn scarifier
GARDENA Electric Lawn Scarifier ES 450 / 30
1. Technical Data
Power consumption
450 W
Voltage
230 V
Frequency
50 / 60 Hz
Working speed of the tool
2500 - 2800 rpm
Aerator width
30 cm
Working depth
max. 4 mm
Working area related emission
characteristic value L
1)
78 dB (A)
pA
Noise level L
2)
91 dB (A)
WA
≤ 2.5 ms
Vibrations a
1)
vhw
2. Operating Instructions Information
Please read and follow these
For safety reasons chil-
A
operating instructions carefully.
dren under the age of 16
Familiarise yourself with the unit's
or people not familiar with
features, its proper use and the
these operating instructions
safety instructions included.
3. Product use
The GARDENA Electric Lawn
It is essential to observe the
Scarifier ES 450 / 30 is designed
manufacturer's operating instruc-
for aerating lawns and grassy
tions to ensure the unit's proper
areas in private domestic and
functioning.
hobby gardens.
The operating instructions also
contain advice for service, main-
It is not designed for use in public
tenance and repair.
facilities, parks, sporting grounds,
on roads, in agriculture or forestry.
4. Assembly
4.1 Checking all the Parts
.Operating instructions
are Included
The Lawn Scarifier box contains
4.2 Operating Parts
1
the following parts:
Lawn scarifier housing
2
.Electric Lawn Scarifier
Upper section of the
ES 450 / 30
guide handle
3
.2 lower sections of the
Middle sections of the
guide handle
guide handle
4
.2 middle sections of the
Wing nuts with bolts
5
guide handle
Cable clip
6
.1 upper section of the
Lower sections of the
guide handle (frame with
guide handle
7
switch / plug combination
Extension cable
and strain relief device)
(not included)
8
.Assembly parts and
Cable relief device
9
cable clip for guide handle
Release knob
0
in a plastic bag
Starting lever
12
Measuring method according to
- 2
1) EN 60335-1
2) directive 2000 / 14 / EC
must not use this Electric
Lawn Scarifier.
Please keep these instructions
in a safe place.
Attention ! To prevent in-
A
jury, the Electric Lawn
Scarifier must not be used for
trimming bushes, hedges and
shrubs. In addition, the Electric
Lawn Scarifier must not be
used for levelling irregularities
in the soil.
A
Wheels
B
Springs
C
Adjustment unit
D
Wheel with end plate
E
Aerator
F
Screws for end plate
G
Retaining spring
H
Screws for guide handle
I
Drive shaft
(receptacle square bar)
J
Receptacle holes
K
Switch / plug combination
G
4.3 Assembling the
Guide Handle (Fig. B)
Warning ! When assembling
the guide handle ensure that
the mains cable is free, that
it is not squashed in the
parts of the handle which are
connected and is not pulled.
Assemble the guide rail as
follows:
1. Guide the upper section of
2
the guide handle
into the
5. Putting into Operation
5.1 Connecting the Unit –
Cable Lock / Extension Cable
(Fig. D 1)
1. First plug the extension cable
7
from below into the base
socket of the combination
switch / plug.
2. Loop the extension cable
and insert it into the cable lock
8
on the guide handle, allow
the lead to the socket to sag
a little.
Note : The cable lock prevents
unintentional disconnection
of the electricity.
Note : When in operation, the
mains cable must always be
guided in the direction you are
working at the side of the area
you are aerating. Always work
away from the mains cable.
6. Correct Aerating
The aerator cylinder can be used
for removing matting and moss
in the lawn as well as for cutting
flat-rooting ranks.
6.1 Aerating
To maintain a well-cared-for
lawn we recommend aerating
every 4 - 6 weeks depending
on the state of your lawn.
1. First of all, mow your lawn to
the length you require. We
particularly recommend this
if the grass has grown tall
grooves in both sides of the
two middle sections of the
3
guide rail
.
2
2. Screw the upper section
to the middle sections of the
3
guide handle
using the wing
4
nuts and bolts provided
.
5
3. Clip the cable clip
with the
cable threaded through onto
the inner side of the guide
handle.
4. Guide both lower sections of
6
the guide handle
into the
5.2 Starting up (Fig. D)
1. Stand the scarifier on an even
part of the lawn.
Note : Always maintain the
safety distance from the
aerator indicated by the
length of the guide handle.
7
Danger of injury !
2. To start the scarifier, press
9
the release button
on the
switch / plug combination and
hold it down. At the same time,
pull the starting lever
0
with
the other hand towards the
handle.
3. When the motor is running, you
can release the release button
9
. If you release the starting
0
lever
the motor switches off.
Blockage Protection
If the aerator is blocked by a
foreign body or if the motor is
(e.g. while you were away on
holiday).
Recommendation : the
shorter you mow your lawn,
the easier it is to aerate,
thus lessening the strain on
the scarifier and increasing
the lifetime of the aerator.
Note : Remaining in one spot
for too long while aerating can
damage the grass.
2. For good results, guide the
Lawn Scarifier at an appropri-
ate speed in strips as straight
as possible across your lawn.
G
grooves in the middle sections
3
of the guide handle.
5. Screw both lower sections of
6
the guide handle
to the
3
middle sections
using the
4
wing nuts
provided.
6. Insert the assembled guide
J
handle into the holes
, Fig. C.
7. Screw the assembled guide
handle from below to the
housing of the Lawn Scarifier
H
using the screws provided
(Fig. C / C 1).
overloaded, the motor is auto-
matically switched off by the
blockage protection. Wait for
approx. 1 minute and start the
scarifier again.
Warning ! If you do not
A
release the starting lever
0
, the scarifier automatically
switches on again after approx.
1 minute. Danger of injury.
The safety devices in-
A
stalled on the scarifier
by GARDENA must not be
removed or bridged, e.g. by
0
tying the starting lever
to
the guide handle. The scarifier
can then no longer switch off
automatically. Danger of injury.
Warning ! The aerator does
not stop immediately after the
motor has been turned off !
To prevent leaving gaps, the
strips should always overlap
by a few centimetres.
Warning ! The rotating
A
aerator can cause
injuries. Always push the
scarifier at a walking pace.
When working on inclines
always stand diagonally
to the incline in a sturdy,
safe stance. Do not work
on extremely steep slopes.
Danger of injury.
13