Gardena FlexControl 1883 Manual de instruções - Página 8
Procurar online ou descarregar pdf Manual de instruções para Equipamento para relva e jardim Gardena FlexControl 1883. Gardena FlexControl 1883 19 páginas. Water computer
Imprimir página
An adapter cable may be required to connect
older sensors, which can be purchased from
GARDENA Service, GARDENA Adapter
cable Art. No. 1189-00.600.45.
Fit anti-theft device (optional) [ Fig. I5 ]:
To secure your Water Computer against theft,
you can obtain the GARDENA Anti-theft device
4. PROGRAMMING
Tip:
V Program the Water Computer with the tap
turned off.
In this way you can avoid getting wet.
Enter watering program:
To set the programme, the controller can be
removed and mobile programming can be carried
out (see 3. PUTTING YOUR WATER COMPUTER
INTO OPERATION "Insert battery").
Set time and day
[ Fig. P1 ]:
1. Turn rotary knob to
The time in hours flashes.
22
.
Art. No. 1815-00.791.00 from GARDENA
Service.
1. Tightly screw the clamp
p
screw
into the circular groove on the rear of
the water computer.
o
2. Use clamp
e.g. for fixing a chain.
It is no longer possible to remove the screw after it
has been screwed in.
2. Select the time in hours (example: 10 hours) with
the + button and confirm with the OK button.
The time in minutes flashes.
3. Select the time in minutes (example: 20 minutes)
with the + button and confirm with the OK but-
ton.
The day of the week flashes.
4. Select the day of the week (example: friday) with
the + button and confirm with the OK button.
A bar is displayed beneath the selected day of
the week.
Set watering start time
5. Turn the rotary knob to
The start time hours flash.
o
complete with the
[ Fig. P2 ]:
.