Gardena RS 10 2150 Manual de Instruções - Página 4

Procurar online ou descarregar pdf Manual de Instruções para Equipamento para relva e jardim Gardena RS 10 2150. Gardena RS 10 2150 11 páginas. Grass shears; grass cutter

Imprimir página

5.3 Working position (Fig. C)

Just hold unit at the handle (5) and

push Grass Shears RS 10 / RL 10

along on its sled for grass edges

and lawn surfaces. The Grass Cutter

RL 20 is equipped with wheels (8)

and an additional guide handle (9)

enabling ease of use.

5.4 Cutting lawn edges and

difficult areas (Fig. D)

For a vertical cut hold the Grass

Shears RL 10 with both hands and

turn the unit into cutting position.

The additional guide handle on the

Grass Cutter RL 20 ensures safe

handling and pushing especially

for a lateral cut.

Adjustment of the guide handle

for RL 20 (Fig. A / C)

The guide handle can be adjusted

by releasing the adjustment knob

(10), and tightening, when the

desired position is achieved.

5.5 Cutting Grass against walls,

trees and fences (Fig. E)

Slide the Grass Shears / Grass

Cutter with the outer side of the

cutting blade along hard objects

and surfaces.

6. Maintenance / Service / Storage

The GARDENA Grass Shears

and Grass Cutter are largely main-

tenance-free.

Please make sure that the con-

tacts of the attachment part (1)

and of the Accu (11) are always

clean.

Grass and dirt should be removed

with a dry rag or brush.

The Grass Shears / Grass Cutter

should be cleaned thoroughly

before and after use, and the cutting

blades lubricated with a biodegrad-

able oil. This improves the cutting

performance. Never grease cutting

blades!

Repairs may only be performed

by GARDENA Service Centres

or by dealers authorised by

GARDENA.

Attention! Always remove

the Accu before working on

the Grass Shears / Grass Cutter.

Risk of injury!

Due to risk of injury to persons

and / or product damage, do not

clean the Grass Shears / Grass

Cutter under running water,

especially under high pressure.

Store the Grass Shears / Grass

Cutter in a dry, frost-free place.

Keep out of the reach of children.

Always cover the blades with the

protective sheath (7) for storage.

Observe the manufacturer's

installation hints when exchang-

ing the cutting blades.

Exchanging the cutting blades

Only use the original GARDENA

Spare Blades, Art. No. 2346.

These blades can be obtained at

your GARDENA dealer or directly

from the GARDENA service centre.

Never use spare parts and ac-

cessories which have not be