Makita 2001 HSC Manual de instruções - Página 3

Procurar online ou descarregar pdf Manual de instruções para Perfurar Makita 2001 HSC. Makita 2001 HSC 14 páginas. Cordless driver drill

Imprimir página
ENGLISH
1.
Set plate
2.
Battery cartridge
3.
Switch trigger
4.
Reversing switch
5.
Arrow

SPECIFICATIONS

Capacities
No load speed (min
Overall length
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for drilling and screw driving in wood,
metal and plastic.
Explanation of general view
6.
Speed change knob
7.
Low speed
8.
High speed
9.
Adjusting ring
10. Pointer
Model
Steel
Wood
Wood screw
Machine screw
High
-1
)
Low
Net weight
11. Tighten
12. Sleeve
13. Ring
5.5 mm x 55 mm
0 - 1,100
270 mm
D.C. 9.6 V

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to drill
safety rules. If you use this power tool unsafely or
incorrectly, you can suffer serious personal injury.
1. Hold power tools by insulated gripping surfaces
when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal
parts of the tool "live" and shock the operator.
2. Always be sure you have a firm footing. Be sure
no one is below when using the tool in high loca-
tions.
3. Hold the tool firmly.
4. Keep hands away from rotating parts.
5. Do not leave the tool running. Operate the tool
only when hand-held.
6. Do not touch the drill bit or the workpiece immedi-
ately after operation; they may be extremely hot
and could burn your skin.
7. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation and
skin contact. Follow material supplier safety data.
SAVE THESE INSTRUCTIONS
WARNING:
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
6095D
10 mm
18 mm
6 mm
0 - 400
1.7 kg
GEB002-2
3