Makita 6016 Manual de instruções - Página 4
Procurar online ou descarregar pdf Manual de instruções para Perfurar Makita 6016. Makita 6016 8 páginas. Drill
Também para Makita 6016: Manual de instruções (20 páginas)
Imprimir página
FUNCTIONAL DESCRIPTION
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before adjusting or checking function
on the tool.
Switch action
1
013437
CAUTION:
Before plugging in the tool, always check to see
•
that the switch trigger actuates properly and
returns to the "OFF" position when released.
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For continuous operation, pull the switch trigger and
then push in the lock button and then release the switch
trigger.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
ASSEMBLY
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before carrying out any work on the
tool.
Installing top grip (auxiliary handle)
013433
Screw the top grip on the tool securely.
1. Switch trigger
2. Lock button
2
Installing or removing drill bit
1
013434
To install the bit, place it in the chuck as far as it will go.
Tighten the chuck by hand. Place the chuck key in each
of the three holes and tighten clockwise. Be sure to
tighten all three chuck holes evenly.
To remove the bit, turn the chuck key counterclockwise
in just one hole, then loosen the chuck by hand.
After using the chuck key, be sure to return to the
original position.
Adjusting depth of drilling
1
013435
The depth gauge is convenient for drilling holes of
uniform depth.
Loosen the wing bolt and adjust the depth gauge to the
desired depth. After adjusting, tighten the wing bolt.
4
1. Tighten
2
2. Chuck key
1. Depth gauge
2. Wing bolt
2