Makita 6227DWE Manual de instruções - Página 9
Procurar online ou descarregar pdf Manual de instruções para Perfurar Makita 6227DWE. Makita 6227DWE 19 páginas. 9.6 v
i2 v
14.4 v
Também para Makita 6227DWE: Manual de instruções (19 páginas), Manual de instruções (19 páginas), Manual de instruções (19 páginas)
Imprimir página
Trickle charge ( Maintenance
charge)
tf youleave t hebattery c artridge inthecharger toprevent spontaneous
discharging
after
ful_ charge, thecharger willswitch into its
"trickle charge (maintenance charge)" mode and
keep the battery cartridge fresh and fully charged.
Tips for maintaining maximum battery life
1. Charge the battery cartridge before completely discharged.
Always stop tool operation and charge the battew cartridge when you notice less tool
power.
2. Never recharge a fully charged battery cartridge.
Overcharging shortens the battery service life. _
3. Charge the battery cartridge with room temperature at 10°C - 40oc (50°F - 104°F).
Let a hot battery cartridge cool down before charging it.
Switch action
CAUTION:
Before inserting the battery cartridge into
the tool, always check to see that the
switch trigger actuates properly and returns
to the "OFF" position when released.
To start the tool, simply pull the trigger.
Tool speed is increased by increasing pres-
sure on the trigger. Release the trigger to
Stop.
Switch t_
Reversing switch action
CAUTION:
,Always check the direction of rotation before operation.
*Use the reversing switch only after the tool comes to a complete stop. Changing the
direction of rotation before the tool stops may damage the tool.
• When not operating the tool, always set
the reversing switch fever to the neutral
position.
This tool has a reversing switch to change
the direction of rotation. Depress
the
reversing switch lever from the A side for
clockwise
rotation or from the B side for
counterclockwise rotation. When the switch
lever is in the neutral position, the switch
trigger cannot be pulled.
switchk_ver
A side
e side
9