Fronius TPS 4000 Manual de instruções de instalação - Página 10
Procurar online ou descarregar pdf Manual de instruções de instalação para Sistema de soldadura Fronius TPS 4000. Fronius TPS 4000 20 páginas. Second earthing socket at rear
Também para Fronius TPS 4000: Manual de instruções de instalação (20 páginas)
Imprimir página
An electric shock can be fatal.
Before starting work:
► turn the power source mains switch to the "O" position
► disconnect the power source from the mains
► ensure that the power source remains disconnected from the mains until all work has
► After opening the device, use a suitable measuring instrument to check that electrically
An inadequate ground conductor connection can cause serious injury and damage
to property.
The housing screws provide a suitable ground conductor connection for earthing the hous-
ing.
► The housing screws must NOT be replaced by any other screws that do not provide a
Risk of scalding from hot system components.
Before starting work, allow all hot system components to cool down to room temperature
(+25 °C, +77 °F). For example:
► coolant
► water-cooled system components
► wirefeeder drive motor
Preparations
Removing the blanking cover
Inserting the rubber lead-through
10
WARNING!
been completed
charged components (e.g. capacitors) have been discharged.
WARNING!
reliable ground conductor connection.
CAUTION!
(a)
(7)
Take off the left side panel
1
Press the blanking cover (a) from the
2
inside towards the outside
The blanking cover is no longer nee-
ded
Insert the rubber lead-through (7) into
3
the recess (b)
(b)