Fronius TPS 4000 Manual de instruções de instalação - Página 10
Procurar online ou descarregar pdf Manual de instruções de instalação para Sistema de soldadura Fronius TPS 4000. Fronius TPS 4000 20 páginas. Second earthing socket at rear
Também para Fronius TPS 4000: Manual de instruções de instalação (20 páginas)
Imprimir página
Removing the hexagon head screw, width = 19
Removing the hexagon nut, width = 32
Mounting the current-socket blanking caps
Re-mounting the front current socket
10
(9)
(e)
(9)
(e)
Remove the front current socket:
4
-
Undo the hexagon head screw
(c)with the n°19 flat spanner
-
Remove the hexagon head
screw
(c)
Remove along with the screw:
-
belleville spring washer
-
socket star
-
the existing current cable
-
Undo the hexagon nut (d) with the
reversible ratchet (C) and the "so-
cket for socket wrench, width 32
-
Remove the hexagon nut
-
Remove insulating washer
-
Pull out the front (-) current so-
cket towards the front
(d)
Mount the current-socket blanking
5
caps (9):
onto the front (-) current so-
a)
cket that you removed in Step
4
b) onto the current socket contai-
ned in the installation kit
The recess (e) must point downwards.
Mount the front (-) current-socket,
6
complete with its blanking cap:
-
Insert the front (-) current-so-
cket, working from the outside
towards the inside
-
Insert insulating washer
-
Screw on the hexagonal nut
-
Tighten the hexagonal nut with
the torque wrench and the "so-
cket for socket wrench, width
32"
-
Thightening torque 35 Nm
IMPORTANT! The current-socket re-
cess (e) must point downwards.