Gardena 867 Instruções de utilização - Página 3
Procurar online ou descarregar pdf Instruções de utilização para Pulverizador de tinta Gardena 867. Gardena 867 3 páginas. 3 l and 5 l
Também para Gardena 867: Manual de Instruções (9 páginas)
GARDENA Pressure Sprayer 3 l / 5 l
Translation of the original German operating instructions.
Please read the operating instructions carefully and observe the notes
given. Use the instructions to familiarise yourself with the Pressure
Sprayer, its proper use and the notes on safety. For safety reasons,
children under 16 as well as persons not familiar with these operating
instructions must not use the Pressure Sprayer. Never operate the
product when you are tired, ill or under the influence of alcohol, drugs
or medicine.
Keep these operating instructions in a safe place.
1. Area of application of your GARDENA Pressure Sprayer
Intended purpose:
The GARDENA Pressure Sprayer is intended for distributing solvent-free
liquid pesticides
1)
, herbicides
1)
, fertilisers
wax
1)
in domestic gardens and allotments. It must not be used in public
places, parks, sport arenas, or in agriculture or forestry.
Compliance with the operating instructions provided by the manu-
facturer is a prerequisite for using the Pressure Sprayer correctly.
1)
In accordance with the laws governing the use of pesticides and detergents, only authorised
substances may be used (authorised specialist shop).
Please note:
Due of the risk of physical injury, the GARDENA Pressure Sprayer
must not be used for spraying substances other than those specified
by GARDENA.
Also, no acids, disinfectants or impregnators, aggressive and solvent-
containing cleaning agents, petrol or spray oil may be sprayed.
We recommend that you only use pesticides approved by the BBA
(German Federal Biological Research Centre for Agriculture and
Forestry). To our knowledge at the time of manufacturing the unit, the
pesticides approved by the BBA will not damage the materials used to
construct the Pressure Sprayer.
When spraying insecticides, herbicides and fungicides or other liquid
plant protection products, you must comply with all special pre-
cautionary measures specified by the manufacturer of the product you
are using.
2. Safety instructions
Danger of physical injuries:
Never open the Pressure Sprayer or unscrew the nozzle when the
Pressure Sprayer is still pressurised. To prevent injury, never connect
the Pressure Sprayer to an air-compressor. Before pulling out the
safety valve
(Fig. A3), the sprayer always has to be placed vertically.
5
Before opening the sprayer, always release pressure completely by
pulling out the safety valve.
Danger! Small parts could be swallowed during assembly and there
is a risk of suffocation from the polybag. Keep infants away during
assembly.
Operation:
Inspect the Pressure Sprayer visually before each use. Never leave your
Pressure Sprayer unattended or for long periods when full and pres-
surised. Keep the unit out of the reach of children. You are responsible
for the safety of others. Keep your Pressure Sprayer away from heat
sources and hot environments. Screw tank cap
use any tools) and check the correct fit of the O-ring
Cleaning:
Release the pressure after each use, empty the container, clean it
carefully, rinse it with clear water and clean the sieve
the pressure sprayer open and allow it to dry. Do not dispose of residual
fluids in the sewerage system (local disposal systems). Always clean
the Pressure Sprayer before using a different product to avoid chemical
reactions. If more than one Pressure Sprayer is used, tanks and tank
caps must not be interchanged.
Storage:
Before storing, loosen the tank cap and always empty your Pressure
Sprayer completely (also after cleaning with water). Store away from
frost. If you use the permanent lock
work very carefully. Never store your pressure sprayer with permanent
lock.
3. Assembly
A1 Mounting the spray tube
A2 Attaching the spray hose
A3 Attaching the spray hose
A4 Assemble shoulder straps
A5 Install suction hose
with sieve
7
4. Operation
Please observe the safety and proportioning instructions provided by the
manufacturer of the product you are going to spray.
B1 Unscrew tank cap
and fill tank
9
WARNING!: The tank may be filled with a maximum of 3 l
(Art. 867) / 5 l (Art. 869) of liquid.
4
1)
, window cleaners
1)
, and car
tight by hand (do not
9
(Fig. B1).
$
. Then leave
8
(Fig. B3) pay attention that you
E
in the hand valve
.
1
2
to the hand valve
.
3
2
to the container cap
.
3
4
.
6
.
8
.
0
A3 Pump using the handle
!
B2 Set mist spray via the nozzle
B3 Press operating tab
and spray liquid.
C
5. Cleaning
Cleaning the Pressure Sprayer:
Always clean your Pressure Sprayer after spraying.
Use Pressure Sprayer only with clear water (possibly with addition of
dish detergent) and spray empty. The valves, the suction hose
the spray pipe
, the nozzle
1
"
case of outer dirtying of handle and tank, thoroughly clean the area
thread and thread O-ring
. We recommend that you have your
$
Pressure Sprayer thoroughly inspected (preferably at a GARDENA
Service Centre) after using it for 5 years.
6. Trouble-Shooting
C1 Cleaning the sieve:
v Open up sieve
on suction hose
8
Problem
Possible Cause
Pump does not
Safety valve
build up pressure.
loose.
Hose connection at
the container and
hand valve is not tight.
Continuous lock
enabled on handle.
Sealing cap
defective.
Pressure Sprayer
Nozzle
does not spray
although there is
Sieve
8
sufficient pressure
hose clogged.
or only sprays with
a weak spray jet.
It is difficult to
Container pressure
open and close the
too high.
container.
If you have any other problems with your Pressure Sprayer please
contact GARDENA Customer Service.
7. Putting into Storage
Storing your Pressure Sprayer:
1. Clean the Pressure Sprayer (refer to 5. Cleaning).
2. Keep your Pressure Sprayer in a place protected from frost.
8. Available accessories
GARDENA Weedkiller Cone
GARDENA Extension Lance
9. Technical data
Max. capacity
Spray tube length
Hose length
Permissible working pressure
Max. permissible operating
temperature
10. Warranty
GARDENA Manufacturing GmbH guarantees this unit for 2 years (from
date of purchase). This guarantee covers all serious defects of the unit
that can be proved to be material or manufacturing faults. Under war-
ranty we will either replace the unit or repair it free of charge if the fol-
lowing conditions apply: The unit must have been handled properly and
in keeping with the requirements of the operating instructions. Neither
the purchaser or a non- authorised third party have attempted to repair
the unit. This manufacturer's guarantee does not affect the user's exist-
ing warranty claims against the dealer / seller.
If you have problems with this unit, please contact our Service.
.
.
"
7
and the sieve
are cleaned. In the
8
and clean it.
7
Remedy
Tighten the safety
is
5
valve
.
5
Tighten the hose con-
nections at the con-
tainer and hand valve.
Release lock
E
E
handle.
dirty /
Clean or exchange
F
sealing cap
F
is blocked.
Unscrew nozzle
"
and clean.
on suction
Open up sieve
clean it.
Release the container
pressure completely
by means of the safety
valve
.
5
Prevents spray mist from
blowing away.
Art. No. 894
For extending the spray
tube.
Art. No. 897
Art. 867 (3 l)
Art. 869 (5 l)
3 l
5 l
36 cm
36 cm
175 cm
175 cm
3 bar
3 bar
40 °C
40 °C
,
on
.
"
and
8