Broadcom 9400-16e Manual de iniciação

Procurar online ou descarregar pdf Manual de iniciação para Placa PCI Broadcom 9400-16e. Broadcom 9400-16e 2 páginas. Pcie storage adapter

Imprimir página

Getting Started Guide

Broadcom PCIe Storage Adapter

Thank you for purchasing the

Broadcom PCIe Storage Adapter.

Please take a few minutes to read

this quick installation guide before

you install the adapter.

ATTENTION:

Perform all installation work at

an electrostatic discharge (ESD)-

safe workstation that meets the

requirements of EIA-625,

Requirements for Handling

Electrostatic Discharge Sensitive

. You must perform all

Devices

actions in accordance to the

latest revision of the IPC-A-610

ESD-recommended practices.

5972-4867-P0

Hardware Installation Instructions

CAUTION: Disconnect the computer from the power supply and from any networks to which you

will install the adapter, or you risk damaging the system or experiencing electrical

shock.

ATTENTION:

To avoid the risk of data loss, back up your data before you change your system

configuration.

To install the Broadcom PCIe storage adapter, follow these steps.

Unpack the adapter, and inspect it for damage. Unpack the adapter in a static-free environment.

Remove the adapter from the anti-static bag, and carefully inspect the device for damage. If you notice

any damage, contact Broadcom or your reseller sales and support representative.

Prepare the computer. Turn off the computer, and disconnect the power cord from the rear of the

power supply. Remove the cover from the chassis.

Insert the adapter into an available PCIe slot. Locate an empty PCIe slot adequate for your

board. Align the adapter to a PCIe slot. Press down gently, but firmly, to seat the adapter correctly in the

slot.

Connect the appropriate cables between the adapter and the backplane or storage devices.

CAUTION: For NVMe connections to a SFF-8639 (U.2) bay

user guide for more information on connecting to NVMe drives.

Make sure the system provides the required airflow for the adapter.

PCIe Adapter

9460-16i

9460-8i

9480-8i8e

9440-8i

9400-16i

9400-8i

9400-16e

9400-8e

Complete installation instructions, including instructions on how to change the bracket, can be found at

this address: https://www.broadcom.com/support/download-search. Refer to the Quick Installation

Guide and the User Guide.

Driver Installation

The firmware and drivers are routinely updated and made available on the Support and Download

center. Please visit

https://www.broadcom.com/support/download-search

firmware and driver for the adapter.

orwarded on the proper pins. Improperly connecting a

SFF-8639 bay could damage the PCIe st

Quick Installation Guide and the cable configurations

Airflow

Inlet Temperature

250 LFM

200 LFM

and download the latest

use

ge adapter and

55°C