A&E Systems 7000 Manual de instruções de substituição - Página 5

Procurar online ou descarregar pdf Manual de instruções de substituição para Acessórios A&E Systems 7000. A&E Systems 7000 6 páginas.

Imprimir página

H. H. H. H. H. F F F F FABRIC REPLA

ABRIC REPLA

ABRIC REPLACEMENT ON 9000/9500

Installing a new replacement fabric on 9000 and 9500

model awning roller cover with 6 slats. See FIG. 7.

I. I. I. I. I. INST

INSTALLING NEW R

INST

ALLING NEW R

ALLING NEW ROLLER CO

INST

ALLING NEW R

Installing new roller cover on 9000 model with 7 slats

and a vinyl strip. See FIG. 6.

1. Use a file to round the ends of the groove in the 5/16"

channel of the main slat D D D D D (FIG. 9).

J J J J J . . . . . INST

INST

INSTALLING NEW R

Installing new roller cover on model 9000 and 9500

with 6 slats. See FIG. 7.

1. Fold the poly-rope ends into the roller tube. This

prevents the fabric from shifting. Make sure the ends of

the poly-rope do not interfere with the cam lock.

2. Reinstall the torsion assembly in the roller tube. Align

the screw/rivet slots on the end cap with the holes in the

roller tube - in the exact same position as in Section D,

Step 2.

NOTE

NOTE: If the roller tube is new, the rivet holes are not drilled.

NOTE

The torsion assemblies must be positioned as follows:

All Models (except the 5000)

All Models (except the 5000): The left-hand torsion

All Models (except the 5000)

assembly position has the slotted groove in the end

cap aligned with the empty groove of the roller tube.

All Models (except the 5000, 9500 & Grande Pavil-

ion)

ion): The right-hand torsion assembly position has the

ion)

slotted groove in the end cap aligned with the empty

groove in the roller tube.

On the right-hand torsion assembly for the 9500 &

Grande Pavilion

Grande Pavilion: Align the slot in the end cap with the

Grande Pavilion

next slot counterclockwise (as viewed from the right

end) from the empty slot.

FIG. 12

EMPTY ROLLER

TUBE GROOVE

FABRIC

END

CAP

LUG

SECTION

VIEW

FROM

REAR

VEHICLE SIDE

CEMENT ON 9000/9500

CEMENT ON 9000/9500 WITH 6 SLA

OLLER COVER

OLLER CO

ALLING NEW R

OLLER CO

ALLING NEW R

ALLING NEW ROLLER CO

OLLER COVER

OLLER CO

K. K. K. K. K. REPLA

REPLACING

REPLA

CING

CING T T T T T ORSION ASSEMBIES

ORSION ASSEMBIES

POLY

TUBING

END

CAP

LUG

VIEW

FROM

FRONT

VEHICLE SIDE

WITH 6 SLA

WITH 6 SLAT R

1. Follow steps 2-8 in Section G.

VER WITH 7 SLA

VER

WITH 7 SLA

WITH 7 SLATS &

WITH 7 SLA

VER

WITH 7 SLA

2. Slide the 5/16" channel of the main slat D D D D D onto the poly-

rope.

3. Drill a 1/8" hole 1-1/2" to 2" from end of the main slat.

Install a 1/8" pop rivet. Do both ends to secure the

fabric.

VER

WITH 6 SLA

VER

VER WITH 6 SLA

WITH 6 SLA

WITH 6 SLATS

1. Follow steps 1-8 in Section G.

ORSION ASSEMBIES

On the 5000 Awning

On the 5000 Awning: The lug on the left-hand torsion

On the 5000 Awning

assembly should be positioned at "11:00" and the right-

hand at "1:00" in relationship to the empty groove. See

FIG. 12.

NOTE

NOTE: Placing the end caps as suggested usually

NOTE

positions the lock lever or lugs in the proper position

when awning is closed. The awning should be opened

and closed several times, and checked. The models

with the cam lock lever should be at "11:00" and the

lugs of the 5000 and 7000 models should be at the

"12:00" position . The end cap may have to be removed

and repositioned if it is not in the proper location. See

FIG. 13.

Models 8500 and 9000 22' - 25' have been manufac-

tured with both standard and heavy duty torsion springs.

Before reinstalling the torsion, properly identify (Stan-

dard or Heavy Duty) the springs. This is necessary for

proper winding of the torsion. See Spring Identification

Chart on page 6.

Secure torsion assemblies to roller using 3/16" dia. x 3/8"

long stainless steel pop rivets. NOTE

tapping screws.

TOP CASTING

FIG. 13

3/8" MIN.

EXTENSION

MAIN

SUPP'T.

ARM

T R

OLLER CO

VER

T R

T ROLLER CO

OLLER CO

OLLER COVER

VER

TS & VINYL STRIP

TS &

VINYL STRIP

TS &

VINYL STRIP

!CAUTION

NOTE

NOTE: DO NOT reuse self-

TOP MTG.

BRACKET

RAFTER

ARM