AlienBees ABR800 Manual de instruções - Página 10

Procurar online ou descarregar pdf Manual de instruções para Flash da câmara AlienBees ABR800. AlienBees ABR800 16 páginas. Ringflash

The Universal Camera Mounting Bracket

Attaching the Mounting Bracket to the ABR800 Ringflash

The ABR800 arrives with the bracket mounting post already in place, attached to the base of

the unit on the rear side below the control panel. To attach the mounting bracket to the ringflash,

you will simply slide the bracket over the mounting post and secure its position with the ver tical

adjustment knob. First, position the mounting bracket with the padded camera platform facing

upwards and locate the two ver tical grooves on the front side of the bracket. Place the bracket

underneath the mounting post on the ringflash unit and line up the two ver tical grooves on the

bracket with the two corresponding rounded extrusions on the post. Slide the bracket on the

mounting post and use the ver tical adjustment knob to secure the position. Before sliding the

bracket onto the mounting post, the vertical adjustment knob must be in the straight-down "unlocked"

position.

The mounting bracket can be positioned anywhere along this mounting post, accommodating

cameras with a 1-inch to 4.75-inch distance from the lens center to the camera base. Depending

on this distance present with your specific camera, you can slide the bracket up and down along

the post until the best position is determined for your camera lens to be centered ver tically inside

the ringflash center hole. With the position set, turn the ver tical adjustment knob clockwise

to secure the placement. Do not overtighten this knob - the knob is designed so that very light

tightening pressure will hold the bracket securely in place on the mounting post.

Attaching the Camera to the Mounting Bracket Camera Platform

The camera platform offers a grip pad surface where your camera rests, attached with the

provided platform mounting screw in any of the four horizontal slots. The different slots provide

flexibility for you to choose the best mounting position for your specific camera, choosing a slot

that is closer forward or fur ther back depending on the width of your camera body. Additionally,

the slots offer side to side flexibility as the mounting screw can be positioned anywhere along the

slot based on the position of your camera's tripod socket. You can use the platform mounting

screw to attach your camera to the bracket, or simply use the platform as a resting place as you

free-hold your camera. With your camera attached, you can slide the platform forwards and

backwards to move your lens in and out of the ringflash center hole. As the platform screw

connection is separate from the rest of the bracket, you can keep your camera attached to the

platform and remove it entirely as needed.

Toll Free 1-800-443-5542 Please call us if you need any assistance!

To attach your camera to the platform, you will first remove the platform from

the bracket. With the platform adjustment knob (located to the left and slightly

above the light stand mount silver bolt head) in the unlock position, slide the

platform backwards on the bracket. Lift the release latch to remove the platform

completely.