A&S Studio Bar 100 Manual do utilizador - Página 11

Procurar online ou descarregar pdf Manual do utilizador para Sistema de altifalantes A&S Studio Bar 100. A&S Studio Bar 100 14 páginas.

Adjust the Volume

Press the + / - buttons on the unit or VOL+ / VOL- buttons on the remote control to adjust the

volume.

If you wish to turn the sound off, press the MUTE button on the remote control. Press the MUTE

button again or press the + / - buttons on the unit or VOL+ / VOL- buttons on the remote control

to resume normal listening.

While adjusting the volume, the status indicator flashes quickly.

While the volume level reaches its maximum level, if you press the VOL+ button again, the status

indicator flashes once. While the volume level reaches its minimum level, if you press the VOL-

button again, the status indicator flashes once.

1 Ensure that the unit is connected to the TV or audio device.

button on the soundbar or press the AUX or OPTICAL buttons on the remote control

2 Press the

to select the desired mode.

3 Operate your audio device directly for playback features.

4 Press the VOL +/– button to adjust the volume to your desired level.

Tip:

In OPTICAL mode, if there is no sound output, ensure the audio setting of the input source (e.g.

TV, game console, DVD player, etc.) is set to PCM mode with optical input.

The first time you connect your Bluetooth device to this player, you need to pair your device to this player.

Note:

The operational range between this player and a Bluetooth device is approximately 26.2 feet (8 m)

(without any object between the Bluetooth device and the unit).

Before you connect a Bluetooth device to this unit, ensure you know the device's capabilities.

Compatibility with all Bluetooth devices is not guaranteed.

Any obstacle between this unit and a Bluetooth device can reduce the operational range.

If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing

mode automatically.

1 While the soundbar is ON, press the

remote control to select Bluetooth mode. The Blue indicator will light up.

2 Activate your Bluetooth device and select the search mode. "A&S Studio Bar" will appear on your

Bluetooth device list.

If you cannot find the unit, press and hold the " BF /PAIR" button on the remote control to initiate

device search. After the "Pairing" voice prompt, Blue indicator will flash rapidly.

3 Select "A&S Studio Bar" in the pairing list. After the "Paired" voice prompt, the system is

successfully connected and the Blue indicator will light up solidly.

4 Begin playing music from the connected Bluetooth device.

button on the soundbar or press the BT button on the

- 9 -