Align-Pilates C8-Pro Reformer Instruções de montagem e manual do utilizador - Página 5

Procurar online ou descarregar pdf Instruções de montagem e manual do utilizador para Equipamento de fitness Align-Pilates C8-Pro Reformer. Align-Pilates C8-Pro Reformer 12 páginas.

Imprimir página

8. Attaching the rope risers:

Part screw in the 2 adjustment knobs and insert the riser (Fig.13 & 14), then pull back on the knob and slide the riser to

the desired height. When happy with the height let go of the knob and twist to tighten and secure the riser in place

(Fig.15).

Fig.13

Fig.14

Fig.15

9. Attaching & setting up the Silent ropes:

First attach the silent handles by threading the nylon loop of the handle through the rope eyelet and then thread the

loop handle through the nylon eyelet to secure the handle to the rope as per Figs. 16, 17 & 18. Pull tight to check it is

secure. Now pass the end of each rope through the pulleys on the end of the rope risers.

Fig.16

Fig.17

Fig.18

Next pull the rope adjusting T bar all the way out as in (Fig 19). The T bar position is changed by

loosening the knob and then pulling back to disengage the locking pin, so that the bar can be slid back or forward.

Now put the spring bar in position 1 (Fig. 20) and place the nylon loop of the handle over the rope holder poles as in

Fig 19. For the next part we recommend standing the reformer up (see 18a), with the assistance of another person,

so that they can hold the machine, whilst you make the required adjustments. With the reformer upright thread each

rope through the rope holes on the T bar and pull the rope tight and then knot each rope so that the knot is flush

against the tube.

Fig.21

Fig.19

Fig. 20

Repeat for the second rope and then check that the ropes are adjusted to exactly the same length, if they are not;

adjust one of the knots, the ropes should be taught with the nylon loop of the handle on the rope holder poles, whilst

making these adjustments. When both ropes are the same length and the knots pulled tight, tie an extra knot in the

tail of the rope for safety. The ropes tails can be coiled around the T bar to get them out the way.

To adjust the ropes when using the reformer, both ropes are simultaneously adjusted by loosening the adjustment

knob underneath the head rest, pulling back on the knob and sliding the T bar in our out. Sliding the T bar in Shortens

the ropes & pulling it out (Fig. 21) lengthens the ropes. Therefore as you move the spring bar away from the standing

platform you should move the T bar in under the carriage.

In summary when the spring bar is in position 1 the chrome part of the T bar should be all the way out (completely

visible) and for position 4 only the end of the chrome T bar should be visible.