AEG 30" DEO76 Manual do utilizador - Página 9

Procurar online ou descarregar pdf Manual do utilizador para Forno AEG 30" DEO76. AEG 30" DEO76 13 páginas. 30” built-in double oven
Também para AEG 30" DEO76: Manual do utilizador (33 páginas)

Imprimir página

Preparing the oven cavity

WARNING:

It is important to the performance of the oven and the protection of adjoining cabinets that the

following installation preparation is observed.

1. The oven cavity floor should accommodate an opening to allow a satisfactory flow of air

to circulate around the appliance.

Should the oven be placed under counter, below an AEG cooktop, be it either gas or electric, it

is acceptable as long as the base of the cabinet that the oven sits on, has the centre piece of

wood, as per the installation instructions, removed. The oven requires a source of fresh air

preferably from below, a minimum opening of 100 sq. in or 645 sq. cm will be sufficient. If the

rear panel on the under counter oven cabinet can be removed, this adds to the amount of air

that can be moved thus ensuring a cooler environment. The oven also has a cooling fan which

aids in the movement of the warm air from the heated oven to be evacuated.

The more air that an oven can have access to, the better it will perform!

2. If possible, the rear wall of the oven cavity should also have an opening – it should be

clear to allow for improved air circulation around the appliance.

The above steps will greatly reduce the outer oven surface temperatures making the kitchen

environment safer. It will also protect both the appliance and the adjoining cabinets.

Securing the oven

Once correctly wired into the main power, locate the oven into the recess and ensure the appliance is

parallel to the front fascia of the enclosure, place shims under the appliance if necessary. The fixing

holes are in the oven trim surrounds (visible when you open the oven door/s). Slide the oven fully into

the recess and insert the appropriate length screws through the mounting holes and into the cupboard

surround to secure the oven position. We recommend a flush to cupboard face installation. The

measurement of the front trim of the oven (20mm) is designed to equal normal cupboard facing material

after allowing for the body of the oven to be secured against the cupboard frame.