Garmin 16-HVS Manual de instruções - Página 29

Procurar online ou descarregar pdf Manual de instruções para GPS Garmin 16-HVS. Garmin 16-HVS 32 páginas. Garmin 16-hvs gps receiver
Também para Garmin 16-HVS: Manual de instruções (30 páginas), Manual de instruções (30 páginas)

Imprimir página

If the target sentence mode is 0 (disable) or 1 (enable), the target sentence

description field must be an identifier for one of the sentences that can be

output by the GPS sensor.

If either the target sentence mode field or the target sentence description

field is not valid, the PGRMO sentence will have no effect.

$PGRMO,GPALM,1 will cause the GPS sensor to transmit all stored

almanac information. All other NMEA 0183 sentence transmission will be

temporarily suspended.

$PGRMO,,G will cause the COM 1 port to change to GARMIN data

Transfer format for the duration of the power cycle. The GARMIN mode

is required for GPS 16/17 series product software updates.

TABLE D-3. Supported NMEA 0183 Sentences

Order and Size

Sentence

Default Output

GPRMC

Yes

GPGGA

Yes

GPGSA

Yes

GPGSV

Yes

PGRME

Yes

GPGLL

GPVTG

PGRMV

PGRMF

PGRMB

Yes

PBRMM

Yes

PGRMT

Once per minute

In TABLE D-3 default Output indicates NMEA sentences that are Garmin16-

HVS defaults. CSI turns off all output except the GPGGA sentence. The time

required to output a NMEA sentence can be determined by multiplying the

maximum number of characters by 10 then dividing the result by the baud rate.

Selected sentences will be transmitted at a periodic rate based on the selected

baud rate and the selected output sentences. The sentences will be output

contiguously. Regardless of the baud rate, the sentences are reference to the

PPS signal immediately preceding the GPRMC sentence, or whichever

sentence is output first.

Appendix D. Garmin16-HVS Setups

Maximum Characters

D-3