Garmin AA2401 Manual do Proprietário - Página 6

Procurar online ou descarregar pdf Manual do Proprietário para GPS Garmin AA2401. Garmin AA2401 21 páginas.

Imprimir página

Charging the Battery Pack

To prevent corrosion, thoroughly dry the USB port, the weather

cap, and the surrounding area before charging or connecting to

a computer.

Do not attempt to use the device to charge a battery that was

not provided by Garmin

. Attempting to charge a battery that

was not provided by Garmin can damage the device and void

the warranty.

Before you can connect the straight connector of the USB cable

to your device, you may need to remove optional mount

accessories.

NOTE: The device does not charge when outside the approved

temperature range

(Specifications, page

You can charge the battery using a standard wall outlet or a

USB port on your computer.

Pull up the weather cap

Plug the small end of the USB cable into the mini-USB port.

Plug the USB end of the cable into an AC adapter or a

computer USB port.

If necessary, plug the AC adapter into a standard wall outlet.

When you connect the device to a power source, the device

turns on.

Charge the battery completely.

Installing AA Batteries

Instead of the optional NiMH battery pack

Battery Pack, page

1), you can use two alkaline, NiMH, or

lithium batteries. This is useful when you are on the trail and

cannot charge the NiMH battery pack. Use NiMH or lithium

batteries for best results.

NOTE: Standard alkaline batteries are not recommended for the

64sc models when using the camera feature.

Turn the D-ring counter-clockwise, and pull up to remove the

cover.

Insert two AA batteries, observing polarity.

Replace the battery cover, and turn the D-ring clockwise.

Hold .

Select Setup > System > AA Battery Type.

Select Alkaline, Lithium, Traditional NiMH, or Precharged

NiMH.

Turning On the Device

Hold .

NOTICE

12).

from the mini-USB port

(Installing the NiMH

Keys

FIND

Select to open the search menu.

MARK

Select to save your current location as a waypoint.

QUIT

Select to cancel or return to the previous menu or page.

Select to scroll through the main pages.

ENTER

Select to select options and acknowledge messages.

Select to open the options menu for the page that is

currently open.

Select twice to open the main menu (from any page).

PAGE

Select to scroll through the main pages.

Select , ,

map cursor.

Select to zoom in on the map.

OUT

Select to zoom out on the map.

Acquiring Satellite Signals

It may take 30 to 60 seconds to acquire satellite signals.

Go outdoors to an open area.

If necessary, turn on the device.

Wait while the device searches for satellites.

A question mark flashes while the device determines your

location.

Select

to open the status page.

shows the GPS/GLONASS signal strength.

When the bars are green, the device has acquired satellite

signals.

Using the Main Pages

The information needed to operate this device is found on the

main menu, map, compass, trip computer, and elevation plot

pages.

Select PAGE to choose the active main page.

Opening the Main Menu

The main menu gives you access to setup screens including

waypoints, tracks, and routes. See

Settings, page 5

From any page, select MENU twice.

Map

represents your location on the map. As you travel,

and leaves a track log (trail). Waypoint names and symbols

appear on the map. When you are navigating to a destination,

your route is marked with a colored line on the map.

Changing the Map Orientation

From the map, select MENU.

Select Setup Map > Orientation.

, or

to select menu options and move the

Main Menu Features and

for main menu settings pages.

moves

Using the Main Pages