AEG BC5003001 Manual do utilizador - Página 30

Procurar online ou descarregar pdf Manual do utilizador para Forno AEG BC5003001. AEG BC5003001 36 páginas.

Installation

Problem

The pyrolytic cleaning does not

operate (the time display shows

„C3")

The display shows F102

The display shows an error code

that is not in this list

If you cannot find a solution to the problem yourself, contact your dealer or the service

centre.

The necessary data for the service centre is on the rating plate. The rating plate is on the

front frame of the appliance cavity.

We recommend that you write the data here:

Model (MOD.)

Product number (PNC)

Serial number (S.N.)

INSTALLATION

WARNING!

Refer to "Safety information" chapter.

The built-in unit must meet the stability requirements of DIN 68930.

Possible cause

The door is not correctly closed

or door lock is defective

• The door is not closed cor-

rectly

• The door lock is defect

There is an electronic fault

Solution

Close the door correctly

• Close the door correctly

• Switch off the appliance

with the house fuse or the

safety switch in the fuse box

and switch it on again

• If the display shows F102

again, refer to the Customer

Care Department

• Switch off the appliance

with the house fuse or the

safety switch in the fuse box

and switch it on again

• If the display shows the er-

ror code again, refer to the

Customer Care Department

.........................................